Notifier independent fire detection and extinguishing control panel with 3 detection zones and 1 programmable extinguishing channel, with the following features:
Zones: 3, of independent detection
Channel: 1, of shutdown with programmable delay (up to 60 s)
Key switch: automatic, manual, disabled
Power supply: 110/230V AC
Battery support: 2x12V 7Ah (to be purchased separately)
Inputs: For status control (flow, pressure)
Outputs: For alarm and shutdown command
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Notifier's RP1R-2PLUS stand-alone fire control panel is designed to efficiently manage fire detection and extinguishing systems, ensuring safety, reliability and full regulatory compliance. It is an ideal solution for critical environments where timely and rapid fire control is critical, such as power plants, server rooms, industrial facilities and technical rooms.
The control panel has three independent detection zones and one extinguishing channel that can be activated in automatic, manual or fully disabled mode by key switch. This allows maximum flexibility in operational management according to the type of installation.
The extinguishing channel can be programmed and delayed up to 60 seconds to enable verification and safety of operations before the extinguishing system is activated. There is a series of input circuits dedicated to monitoring the status of the system: flow control, low pressure, valves, fault signals, and more.
The control panel provides outputs for alarm, shutdown command, and other system signals, ensuring full integration with the rest of the fire protection system.
Compact design and simple configuration make RP1R-2PLUS easy to install, even in settings where space is limited. The control panel is powered by 110/230V AC, supports 12V 7Ah batteries and has a built-in 300mA battery charger. Its compact size also makes it ideal for electrical cabinets or technical rooms.
RP1R-2PLUS is certified according to European standards:
EN 12094-1:2003 (extinguishing systems)
EN 54-2 (fire alarm control panels)
EN 54-4 (power supply)
CPR certification ensures compliance with the essential requirements for safety, fire resistance and reliability over time.
| Detection zones | 3 independent |
| Shutdown channels | 1 (programmable, delayable up to 60 s) |
| Shutdown Modes. | Automatic / Manual / Disabled |
| Inputs | Flow control, low pressure, etc. |
| Outputs | Alarm, shutdown control |
| AC power supply | 110/230V - 50/60 Hz |
| Battery charger | 300 mA max |
| Batteries supported | 2 × 12V 7Ah |
| Utility supply current | 2 × 2.5 mA |
| Certifications | EN 12094-1, EN 54-2, EN 54-4, CPR |
| Dimensions | 353×381×123 mm (H-L-P) |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent