Notifier addressed input module, NO contact control with built-in isolation, compatible with 700 series analog control panels, with the following features:
Control panel compatibility: All Notifier 700 series control panels
Addressing: Rotary switches (01-159)
Power supply: From the loop, 15-30 Vdc
Standby current: 310 µA (no blink) / 510 µA (blink)
Supervised current: 0 µA (open), 100 µA (normal), 200 µA (short)
Tri-color LED: Green, Red, Yellow (programmable)
Max. cable cross-section: 2.5 sq. mm
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The Notifier M710E module enables monitoring of a single input in addressed fire alarm systems, offering high reliability and ease of integration. Compatible with all Notifier 700 series analog control panels, it allows connection of normally open dry contact devices such as manual pushbuttons or fire switches.
Each M710E is equipped with high-visibility tricolor LEDs to show module status (normal, alarm, fault), and responds to control panel polling with constant communications. The built-in isolation device ensures protection of the communication loop in the event of a short circuit. Address is easily set by rotary decimal switches, 01 to 159.
The module can be mounted:
On standard DIN rail (35 x 7.5 mm) via built-in rear clip
On dedicated M200E-SMB wall box (not included)
Connection is facilitated by plug-in terminals and compact design, which allows neat installation even in limited space.
Addressable fire alarm systems
Monitoring of manual pushbuttons or devices with NO contact
Control of remote entrances in public, industrial or residential buildings
Integration into systems with Notifier 2-wire loops
| Model | M710E |
| Type | 1 addressed input module |
| Control panels compatibility | All Notifier 700 series control panels |
| Addressing | Rotary switches (01-159) |
| Power supply | From loop, 15-30 Vdc |
| Standby current | 310 µA (no blink) / 510 µA (blink) |
| Supervised current | 0 µA (open) / 100 µA (normal) / 200 µA (short) |
| Tri-color LEDs | Green, Red, Yellow (programmable) |
| Loop isolation | Integrated |
| Operating temperature | -20°C TO +60°C |
| Operating humidity | 5% - 95% (without condensation) |
| Dimensions (H × W × D) | 93 × 97 × 22 mm |
| Weight module only | 118 g |
| Weight with M200E-SMB box | 263 g |
| Max. cable cross-section | 2.5 mm² |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent