Notifier Addressable Module is designed for managing electrical loads up to 240 Vac in fire detection systems. Thanks to the built-in bistable relay with NO and NC contacts, it is possible to control external devices safely and precisely, maintaining the output condition (open or closed) even in case of communication breakdown with the control panel, with the following features:
Bistable relay for loads up to 240Vac
Powered directly from the communication loop
Installation on 35mm DIN rail or wall-mounted with dedicated box
Three-color LED for status indication and diagnostics
Built-in isolator circuit for loop protection
CPR certified (0786-CPR-21748) for fire protection systems
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The module is housed in a revamped enclosure designed for quick installation on a 35 mm DIN rail or on the wall using the M200ESMB box. This flexibility allows it to be used in a variety of installation contexts, simplifying installation in electrical panels or on wall surfaces.
A convenient three-color LED (green, red and yellow) allows authorized technical personnel to quickly identify the module status (regular operation, alarm, fault), facilitating testing, maintenance and troubleshooting operations.
The built-in isolator circuit ensures protection of the communication loop, isolating any faults and preserving system continuity. Two-color plug-in terminals (green for loop, red for output) allow quick, safe and tidy connection, optimizing installation and maintenance time.
Certified according to CPR regulations, the M701E-240 module is fully compliant with the safety requirements of fire detection systems. It is suitable for public, industrial and commercial buildings where management of external loads via remote control is required.
| Feature | Value |
|---|---|
| Operating voltage | 15 to 32 VDC |
| Quiescent power consumption | 27 µA max. at 24 VDC |
| Absorption in alarm | 5.5 mA max. at 24 VDC (communication every 5 sec. with LED on) |
| Relay type | Bistable |
| Relay contact rating | 5A at 30 Vdc / 5A at 250 Vac (resistive load) |
| Relay contacts | 1 NO + 1 NC |
| Mounting | Wall or 35 mm DIN rail |
| Status LEDs | Tricolor (green/red/yellow) |
| Built-in isolator | Yes |
| Operating temperature | -20/+60 °C |
| Relative humidity | 5/95% (non-condensing) |
| Degree of protection | IP30 |
| Certification | CPR (0786-CPR-21748) |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent