FTG18OM16 flexible cable, G18 rubber insulated, LS0H outer sheath M16 quality, PH120 fire resistant, halogen-free and low smoke emission. Ideal for emergency, security and firefighting systems, with the following characteristics:
Section: 5G10 sq mm (5 conductors + ground)
Rated voltage: 0.6/1 kV
Conductor diameter: 4 mm
Insulation thickness: 1 mm
Sheath thickness: 2 mm
Outer diameter: 22.1 mm
Electrical resistance (at 20°C): 1.91 Ohm/km
Current carrying capacity (in pipe): 60A
Current rating (in free air): 75A
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
FTG18OM16 cable is designed to ensure continuity of service even under critical conditions, such as during a fire. Due to the combination of G18 rubber insulation, glass/mica tape and LS0H sheathing, it is suitable for emergency and signaling installations in high-risk environments.
Can be used in public environments and infrastructures such as tunnels, train stations, airports, subways, fire alarm and extinguishing systems, as well as for powering emergency lights and life-saving devices. Suitable for fixed installation, including unprotected underground, in wet environments and outdoors.
Fire and emergency systems
Automatic detection and extinguishing
Train stations and subways
Tunnels and airports
Shopping malls and hospitals
Evacuation and active security systems
| Conductor | Flexible red copper, class 5 |
|---|---|
| Conductor diameter | 4 mm |
| Tape | Glass/mica |
| Insulator | Rubber G18 |
| Insulation thickness | 1 mm |
| Outer sheathing | Thermoplastic LS0H M16 |
|---|---|
| Sheath thickness | 2 mm |
| Sheath color | Blue |
| Outer diameter | 22.1 mm |
| Rated voltage | 0.6/1 kV |
|---|---|
| Electrical resistance (at 20°C) | 1.91 Ω/km |
| Current carrying capacity (tube) | 60 A |
| Current carrying capacity (free air) | 75 A |
| Operating temperature | -15 °C TO +90 °C |
| Max short circuit temp (5 s) | 250 °C |
| Minimum bending radius | 14 × Outer Ø |
| Standards | CEI 20-67, CEI EN 50267, HD 308 |
|---|---|
| Fire resistance | PH120 - F120 (120 min at 820 °C) |
| Environments of use. | Indoor, outdoor, damp, underground |
|---|---|
| Section | 5G10 mm² (5 conductors + ground) |
| LS0H sheath characteristics | Low smoke, toxic gas and zero halogen emission |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent