Outdoor motion sensor with IP55 protection, light adjustment and activation time, ideal for residential and industrial applications.
Power supply: 230V ac ±10% 50Hz
IP55 protection rating: perfect for outdoor installations
Detection angle: up to 220 degrees
Detection range: up to 12 meters
Timing adjustment: from 35 seconds to 20 minutes
Brightness adjustment: from 5 to 1000 lux
Compatibility: with LED, fluorescent and incandescent lamps.
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
The Perry Zero 1SPSP055B detector is designed for reliability, efficiency and durability. Equipped with IP55 rating, it is perfectly suited for use in outdoor or wet environments, such as entrances, driveways, garages, warehouses, facades and courtyards.
The detection angle of up to 220 degrees and maximum range of 12 meters ensure optimal coverage for detecting wide and fast movements. The user can fine-tune the power-on duration and brightness threshold as needed for automatic activation only in low-light conditions or during specific time slots.
Residential entrances and doorways
Transit areas or driveways
Garages and utility rooms
Outdoor environments of residential or industrial buildings
| Feature | Value |
|---|---|
| Power supply | 230V ac ± 10% 50 Hz |
| Incandescent lamps | 1800 W |
| Fluorescent lamps not rephased | 480 W |
| Fluorescent lamps rephased in parallel | 250 W |
| CFL/LED Lamps (230V) | 7W ÷ 23W, max 5 lamps |
| Degree of protection | IP55 |
| Cable cross-section at terminals | 0.75 ÷ 2.5 mm² |
| Pollution degree | Normal |
| Detection angle | Up to 220° |
| Sensing distance | Max 12 m |
| Timing adjustment | From about 35" to about 20' |
| Brightness adjustment | From 5 to 1000 LUX |
| Warm-up time | About 40" |
| Operating temperature | From -20°C to +40°C |
| Storage temperature | From -25°C to +70°C |
| Dimensions (W × D × H) | 72.6 × 91.6 × 93.5 mm |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent