Fantini Cosmi adjustable differential pressure switch, for control and regulation of nonexplosive fluids and gases, Suitable for compression systems, in boilers, tanks, autoclaves, in ventilation systems, lubrication:
Scale 5 ÷ 16 bar
Differential (must be subtracted from the scale value) 1 ÷ 3.5
Maximum pressure sensitive element bar 18
G 1/4 inch female connection
Degree of protection IP40
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Installation:
Direct branch installation
Connection to the pressure switch element G 1/4 inch female
In the case of fluids with a temperature higher than the maximum indicated, connect the pressure switch to the pipeline by interposing a spiral-wound metal tube to allow heat dissipation
Metal bracket mounting possible, except for versions in watertight enclosure
When pressure increases: opens 1-2 closes 1-4
In the pressure switch with manual lockout and re-engagement at maximum pressure, re-engagement may occur when the pressure is below the value set on the differential
| Feature | Detail |
|---|---|
| Sensing element | Stainless membrane, laser welded |
| Frame | Metallic |
| Lid | Shock-resistant thermoplastic material |
| Connection outlet | With PVC grommet |
| Differential | Adjustable |
| Connection | G 1/4 inch female (wrench 17 mm) |
| Maximum controlled fluid temperature | 120°C |
| Permissible temperature of pressure switch body | -35 ÷ 60°C |
| Storage and transport temperature | -35 ÷ 60°C |
| Feature | Detail |
|---|---|
| Rated insulation voltage Ui | 415V~ |
| Rated continuous service current Ith | 16A |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent