Abb residual current circuit breaker 16A 2P 30mA A 6KA DS202CRC16A30

The residual current circuit breaker is located next to the circuit breaker and integrates a magnetic protection to a thermal one, and in case of need it interrupts the electric current.

 

The residual current circuit breaker is, therefore, a system that combines the functions of the circuit breaker with magnetic and thermal features.

 

The residual current circuit breaker in the electrical system integrates three different protections:

• the magnetic one for short circuits that can endanger an entire building with the danger of fire;
• the thermal one for overloads in the supply of electricity (e.g., more than one appliance in operation);
• the differential one proper to the circuit breaker, which protects the subject from a power leakage
  
   

Curve C, trip threshold of 5 to 10 times In, for application of ohmic-inductive circuits with medium inrush currents. And widely used in domestic systems

 

The differential circuit breaker type A tripping is ensured for alternating sine differential currents and unidirectional pulsating differential currents applied suddenly or slowly increasing (IEC EN 61008-1).

 

The DS202CR series RCBO is a 2P device in two modules for protection of single-phase end-user circuits against overload and short-circuit currents. Protection against the effects of alternating and direct pulsating sinusoidal earth fault currents. Protection against indirect and additional contacts. Final protection against direct contacts.

 

Characteristics:

• Reference standards: IEC/EN 61009-1 IEC/EN 61009-2-1
• Rated operating voltage: according to IEC 60898-1 230 V
• Rated insulation voltage (Ui): according to IEC/EN 60664-1 440 V
• Impulse withstand voltage 4kV
• Rated extreme short-circuit capacity 10kA
• Maximum peak current: 0.25kA
• Rated frequency (f): 50 Hz frequency
• Power loss: 4.20 W
• Energy limitation class: 3
• Electrical resistance: 10000 operations
• Mechanical resistance: 20000 operations
• Fault indication: Blue flag on the window
• Operating characteristic: Instantaneous
• Overvoltage Category: III
• Position of neutral terminals: Right Left
• Tightening torque: 4 Nm
• Connection capacity: Distribution rod 1010 mm² Flexible 1...25 mm² Rigid Solid 135 mm²
• Nominal cross-section: 1 - Solid core 1 35 mm² 4 - Multi-Wired 1 25 mm²
• Wire stripping length: 11 millimeters
• Ambient temperature: In operation -25 55 °C
• Degree of protection: IP20
• Pollution degree: 3
• Dimensions: Product width: 36mm width - 86mm height - 72mm depth
• Product net weight: 0.220 kg
• Built-in depth (t2): 72 millimeters.