The LeaksProtect Jeweller is Ajax's signature wireless flood detector designed to promptly detect water leaks in domestic, commercial and industrial environments. Using Jeweller technology, it communicates securely and quickly with the system hub, ensuring round-the-clock reliability for years to come, with no maintenance required.
With a compact design (only 14 mm high) and active sensors on all four sides, the LeaksProtect is an immediate, discreet and effective solution to prevent flood damage at any critical point.
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The LeaksProtect Jeweller detects the first signs of water at its location, thanks to four pairs of sensitive contacts positioned on all sides. In case of simultaneous contact with water, the alarm is sent to the hub in less than 0.15 seconds.
The detector notifies both the beginning and the end of flooding, enabling rapid emergency management.
Combined with the Ajax WaterStop valve, the LeaksProtect allows automatic or manual management of water shut-off via apps or automatic scenarios, creating a smart, integrated anti-flooding system.
Wherever water comes from, the detector will immediately activate the alarm. Contact pairs are located on the four edges of the LeaksProtect housing. If at least one of them comes into contact with water, the detector signals a leak. And when the contacts dry out, it notifies the end of the leak.
LeaksProtect detectors can protect both small apartments and commercial centers/industrial complexes from flooding. In case of an incident, informative notifications will let you know where to send plumbers.
| Compatible Devices. |
|---|
| Hub (2G) Jeweller |
| Hub (4G) Jeweller |
| Hub 2 (2G) Jeweller |
| Hub 2 (4G) Jeweller |
| Hub 2 Plus Jeweller |
| Hub BP Jeweller |
| Hub Hybrid (2G) |
| Hub Hybrid (4G) |
| Hub Hybrid (4G) (without casing) |
| Hub Plus Jeweller |
| ReX 2 Jeweller |
| ReX Jeweller |
| Feature | Description |
|---|---|
| Description | Proprietary wireless communication technology for transmission of commands, alarms and events. |
| Key Features. | - Two-way communication. - Advanced anti-sabotage system. - Block encryption with mobile key. - Instant notifications. - Remote control and configuration in Ajax apps. |
| Operating frequencies. | - 866.0-866.5 MHz - 868.0-868.6 MHz - 868.7-869.2 MHz - 905.0-926.5 MHz - 915.85-926.5 MHz - 921.0-922.0 MHz Based on sales region. |
| Maximum effective radiated power (ERP) | up to 20 mW |
| Automatic power control | Reduces power consumption and radio interference. |
| Radio signal modulation | GFSK |
| Radio communication range | Up to 1,300 m (between the device and the hub or repeater in the open field) |
| Encrypted communication | All saved and transmitted data are protected by block encryption with a moving key. |
| Radio frequency hopping | To avoid radio interference and signal inhibition. |
| Feature | Description |
|---|---|
| Always on | Detects flooding 24/7/365 |
| Detects early signs of flooding | All four sides of the device have contact pairs. LeaksProtect Jeweller detects the first signs of flooding as soon as water reaches at least one of them. |
| Detection time | within 0.15 s (detector sends an alarm as soon as it gets wet on both sides) |
| Installation without tools | Place LeaksProtect Jeweller on the floor under the washing machine, dishwasher, bathtub or radiator. |
| Remote configuration and management | in Ajax apps (current status information, battery charge status, and communication with a hub) |
| LED indication | The LED is located under the Ajax logo on the housing and indicates detector states. |
| Automation scenarios | LeaksProtect Jeweller can trigger different automation scenarios, such as activating the Jeweller WaterStop valve to cut off the water supply in case of flooding. |
| Feature | Description |
|---|---|
| Tamper alarm | Notifications about attempts to breach the integrity of the case. |
| Protection against counterfeiting | Device authentication |
| Detection of loss of connection | within 36 s (detection time depends on Jeweller or Jeweller/Fiber settings) |
| Feature | Description |
|---|---|
| Battery | 2 × AAA (preinstalled) |
| Type | Type C |
| Calculated battery life | up to 5 years |
| Detector operating voltage | 2,1-3,3 V⎓ |
| Rated operating voltage of the detector | 3 V⎓ |
| Detector current consumption at rest | 14 μA |
| Maximum detector current consumption | 33 mA |
| Full battery capacity | 1,000 mAh |
| Low battery voltage | 2,5 V⎓ |
| Low battery recovery voltage | 2,7 V⎓ |
| Battery voltage at end of life | 2.1 V⎓ (device is turned off) |
| Battery capacity at end of life | 100 mAh |
| Manufacturer | Huiderui, Energizer |
| Feature | Description |
|---|---|
| Dimensions | 56 × 56 × 14 mm |
| Weight | 40 g |
| Operating temperatures | 0 °C to +50 °C |
| Maximum allowable humidity | up to 100% |
| Protection class | IP65 |
| Element | Description |
|---|---|
| Main device | LeaksProtect Jeweller |
| Batteries | 2 AAA batteries (preinstalled) |
| Documentation | Quick Start Guide |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent