The Ajax Transmitter Jeweller is a wireless transmitter module designed to integrate third-party wired devices into the Ajax security system. Compatible with sensors and NC/NO contact devices, it enables the transformation of a traditional detector into a fully manageable and monitorable element via Ajax hub and mobile app. Ideal for connecting IR barriers, gas detectors, keypads, panic buttons and other wired devices to a modern wireless security system.
Allows the integration of wired sensors into the Ajax system
Supports NC (normally closed) and NO (normally open) contacts
Built-in 3.3 V⎓ power supply for connected devices
Wireless transmission via Jeweller protocol
Compatible with custom events: Intrusion, Fire, Emergency Help, Gas Alarm, Flooding, Technical Fault
Operates in temperatures from -25°C to +50°C and humidity up to 75 percent
Instant notifications to smartphones and monitoring center
Configuration and monitoring via Ajax app (iOS/Android)
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Module for integrating third-party wired detectors into an Ajax system. Transmitter allows to connect IR barrier, liquid level detector, gas leak detector, keypad, panic button or any other device with NC/NO type contact to Ajax.
Transmitter allows a detector or third-party device with a wired output to be connected to the Ajax security system. The module receives alarm and event information via a wired connection. After receiving an event, it transmits it to the hub via the Jeweller wireless communication protocol, and the hub informs the security institution and system users.
Transmitter works with any detector, keypad, or device with an NC/NO contact type. The module supports many types of events: intrusion, fire, emergency help, panic button, gas alarm, malfunction, flooding, etc. The type of event depends on what alarm code should be sent to the alarm receiving center and what is written in the notifications the user receives. This ensures an appropriate response to the threat.
To add Transmitter to your security system, simply scan the QR code in the Ajax application. You can set the type of wired device connected in the Ajax applications for smartphones and PCs. The module is compact and easy to install in a detector case or mounting box. Transmitter's built-in accelerometer alerts in case of sabotage attempt.
| Ajax Device | Compatibility |
|---|---|
| Hub (2G) Jeweller | Compatible |
| Hub (4G) Jeweller | Compatible |
| Hub 2 (2G) Jeweller | Compatible |
| Hub 2 (4G) Jeweller | Compatible |
| Hub 2 Plus Jeweller | Compatible |
| Hub BP Jeweller | Compatible |
| Hub Hybrid (2G) | Compatible |
| Hub Hybrid (4G) | Compatible |
| Hub Hybrid (4G) (without enclosure) | Compatible |
| Hub Plus Jeweller | Compatible |
| ReX 2 Jeweller | Compatible |
| ReX Jeweller | Compatible |
| Feature | Value |
|---|---|
| Type | Proprietary wireless technology for commands, alarms and events |
| Key Features |
|
| Operating frequencies |
|
| Maximum radiated power (ERP) | Up to 20 mW |
| Signal modulation | GFSK |
| Communication range | Up to 1,600 m (in open field) |
| Encrypted communication | Block encryption with moving key |
| Frequency hopping | Active to avoid interference and inhibition |
| Power management | Automatic power control |
| Feature | Value |
|---|---|
| Scheme Supported | AATT (Tamper Alarm Tamper Alarm) |
| Available terminals |
|
| Device contact states | NO, NC |
| Tamper contact states | NO, NC |
| Supported cable length | Up to 130 m (with 24 AWG twisted pair) |
| Operating modes | Pulse, Bistable |
| Sensor mode | Alarm Notification / Security Mode Change |
| Category | Supported Events |
|---|---|
| Configurable events (14 total) |
|
| Requirement | Value |
|---|---|
| Placement | Inside the housing of the wired detector |
| Minimum space required | 110 × 41 × 24 mm |
| Alternative | Radio-transparent compatible housing (if not installable in detector) |
| Function | Description |
|---|---|
| Protection against counterfeiting | Integration module authentication |
| Accelerometer | Warning in case of displacement of the integration module |
| Tamper alarm terminals | For connection of wired device anti-sabotage tamper (if applicable) |
| Detection of communication loss | Within 36 s (depending on Jeweller or Jeweller/Fiber settings) |
| Source | Details |
|---|---|
| Batteries | 3 × CR123A (preinstalled) Variable life depending on consumption of connected device |
| Output for wired device | 3.3 V⎓, up to 125 mA |
| Parameter | Value |
|---|---|
| Dimensions | 100 × 39 × 22 mm |
| Weight | 74 g |
| Operating temperature range | -25 °C to +50 °C |
| Maximum allowable humidity | Up to 75% |
| Electrical protection class | Class III |
| Element | Included |
|---|---|
| Module | Transmitter Jeweller |
| Batteries | 3 × CR123A (preinstalled) |
| Installation | Installation kit |
| Documentation | Quick Start Guide |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent