Ebara Ego 2 25/60-130 single electronic Circulating pump threaded 230V

€111.59

Tax included

Ebara Ego 2 25/60-130 cast iron threaded single electronic circulating pump:

Minimum flow rate 5.4 meters - 10 l/minute
Maximum flow rate 1.8 meters - 50 l/minute
230V power supply
Nominal port diameter DN 25
Maximum pressure dm 60
Centre distance 130 mm
Water outlet 1" Inch
Pipe connection G1-1/2
Power Max 35W
Weight 1.65 kg

Suitable for circulation of hot and cold water in general, air conditioning, central heating, domestic, solar systems, constant or variable flow where operating point optimization is required.

Last items in stock

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

Integrated electronically controlled circulating pump with a permanent magnet rotor. They differ from standard fixed-speed circulation pumps in that they can continuously adjust operation according to the actual demands of the system, and this provides significant savings in electrical energy, as well as ensuring a reduced noise level. Suitable for hot and cold water circulation in general, air conditioning systems, central heating systems, domestic, solar systems, constant or variable flow where operating point optimization is required.

Technical data:

Maximum pressure 10 bar
Liquid temperature -10 ÷ +110°C
Ambient temperature 0 ÷ +40°C
Max amount of glycol 30%
Minimum suction pressure 0.05 bar at 50°C - 0.4 bar at 80°C - 1.1 bar at 110°C
Insulation class F
Degree of protection IP44
Voltage Single-phase 1~230V

Materials:

Pump body Cast iron with cataphoresis coating
Impeller Technopolymer
Shaft Stainless steel AISI 420 (EN 1.4028)
Separator sleeve Stainless steel AISI 316 (EN 1.4401)

Heating systems:

Pumps are suitable for one-pipe, two-pipe, underfloor heating systems and mixing loops in large systems. All Ego circulators automatically and independently control the differential pressure, adjusting pump performance according to heating needs.

Air conditioning systems:

For use of Ego pumps on air conditioning systems, refer to the minimum allowable temperatures for each specific product family. Some models are suitable for circulating fluids with temperatures below 0 Degrees (and therefore particularly suitable for air conditioning and/or refrigeration systems).