Self-priming Electric Pump EBARA AGA/E IE2 0.75 Hp Single Phase

€149.43

Tax included

Self-priming electric pump model EBARA AGA/E IE2:

Power 0.75 Hp/0.55kW
Power supply Single phase 230V
Minimum flow rate 45m-5L/min
Maximum flow rate 18m-50L/min
Current Consumption 4A
Connections DNA/DNM G 1 inch
Suction height 8m
Headroom 45m
Dimensions: height 185 mm - length 405 mm - depth 199 mm

Applications:

Domestic pressurization
Small garden irrigation
Vehicle washing
General clean water handling

Available

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

AGA self-priming electropumps are practical and easy to use, and they also allow easy installation due to their low weight. Installed on a flat, well-fixed surface, they allow suction up to 8 meters. Installation with a foot valve with filter allows for reliable operation. Its versatility and size also make it easy in maintenance operations.

Pump technical data:

Maximum operating pressure: 6 bar
Maximum liquid temperature: 45°C
Maximum suction depth: 8 m
Suction connection G1
G1 discharge connection

Motor technical data:

IE3 energy-efficient motors starting from 0.75kW
Self-ventilated 2-pole asynchronous motor
Insulation class F
IP44 degree of protection
Single-phase voltage 230V ±10% 50Hz
Permanently inserted capacitor and built-in self-resetting thermal overload protection for single-phase motor

Materials:

Cast iron pump body
AISI 304 seal holder disc for AGA 0.60-0.75-1.00
AISI 303 shaft (part in contact with the liquid)
Impeller in EPP+PS reinforced with glass fibers for AGA 0.60-0.75-1.00, in brass for the rest of the range
Mechanical seal in Ceramic/Carbon/NBR
Ejector and diffuser made of EPP+PS reinforced with glass fibers
Pump weight 12.50Kg