Leo Pumps electronic pressure flow switch for electric pumps with triple function (pressure, flow, time), automatic reset and adjustable restart pressure. Complete with pressure gauge and cables, with the following features:
Adjustable pressure: 1.2 to 3 bar
Three operating modes: pressure, flow and time
Maximum pump power: 1.5 kW (2 HP)
Max current: 10 A
Connection: 1 inch
Maximum pressure: 10 bar
Degree of protection: IP65
Cables included: 1.6 m with SHUKO plug + 45 cm for pump connection
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
The Leo pressure flow switch, represents an intelligent and compact solution for the management of domestic and industrial electric pumps. With its triple operating mode (pressure, flow, time), it ensures precise and reliable control under all conditions of use.
Equipped with adjustable restart pressure between 1.2 and 3 bar, it allows customization of the water system according to specific needs. The device comes already wired with SHUKO plug and pump outlet cable, making installation as easy as possible.
With IP65 rating, it is protected against dust and water jets, making it suitable even for installations in wet or outdoor environments. The automatic reset function ensures continuity of service even in case of blockages or faults.
| Supply voltage | 220-240V |
|---|---|
| Frequency | 50/60 Hz |
| Maximum current | 10 A |
| Max pump power | 1.5 kW / 2 HP |
| Hydraulic connection | 1 inch threaded |
| Adjustable restart pressure | 1.2 to 3 bar |
| Maximum pressure | 10 bar |
| Maximum operating temperature | 60 degrees |
| Protection | IP65 |
| Functions | Pressure / Flow / Time |
| Reset | Automatic |
| Power Cable | 1.6 m with SHUKO plug |
| Pump cable | 45 cm |
| Compliance | RoHS |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent