Circulator DAB VS 8/150M, wet rotor 60182217H

DAB VS 8/150M wet rotor circulator 1 1/2 inches 150mm 60182217H

€181.65

Tax included

DAB VS 8/150M wet rotor circulator for circulating hot water in closed and pressurized or open vessel type domestic central heating and air conditioning systems.

Axle 150mm
Pump connections 1 1/2 inches

Download data sheet

Last items in stock

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

Features:

Power supply 50Hz 1x230 V ~
Axle 150mm
Pump connections 1 ½
Unions on request Brass, 1/2 F - 3/4 F - 1 F COPPER d22 e d28
Max power 22W
In The 0.14 To
Operating range: from 0.6 to 3.7 m3/h with head up to 6 metres
Temperature range of the liquid: from -10°C to +85°C for use health and +110°C for other uses
To avoid the phenomenon of limestone should not exceed 65°C and provide an anti-scale system when the degree of hardness of the water exceeds 15 French degrees
Pumped liquid: clean, free from solid substances and mineral oils, not viscous, chemically neutral, close to characteristics of water (glycol max 30%)
Maximum operating pressure: 10 bar (1000 kPa)
Installation: with lASSE HORIZONTAL MOTOR
Single body formed by the hydraulic part in the bronze and motor wet rotor
Motor casing in die-cast aluminium
Impeller in technopolymer
Motor shaft in stainless steel tempered and mounted on bronze bushings with graphite lubricated by the pumped liquid
Shirt of the rotor, jacket stator, and closing flange in stainless steel
Thrust ring ceramic
o-rings in silicone and the cap air vent brass
Motor two-pole asynchronous wet rotor is protected for resistance, and requires no overload protection
Operation three-speed
Degree of protection: IP 44
Insulation class: F
Cable gland: PG 11
Installation: with lasse horizontal motor.