The Dab FEKA VS 750 M-NA is a submersible sewage pump made of stainless steel, ideal for heavy-duty civil, domestic and professional applications. Equipped with microcast steel Vortex impeller, it is designed for lifting sewage and wastewater containing solids up to 50 mm in diameter. This manual version without a float switch is suitable for fixed or portable installations in a vertical position.
Submersible sewage pump
AISI 304 stainless steel pump body
Vortex impeller made of microcast steel
AISI 316 stainless steel motor shaft
DNM GAS: 2 inches
Maximum flow rate: 24 m³/h
Maximum head: 9.6 m
Solids free passage: up to 50 mm
Rated power: 0.75 kW (1 HP)
Maximum power consumption: 1.11 kW
Power supply: single-phase 220240 V ~ 50 Hz
Degree of protection: IP68
Insulation class: F
Power cable: 10 meters H07RN-F with Schuko plug
Manual version without float switch
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
All components in contact with the liquid are made of stainless steel, ensuring corrosion resistance and long service life. Double mechanical seal with interposed dolio chamber (non-toxic oil) ensures complete motor protection, even under demanding conditions.
This pump is perfect for:
Sump sumps
Catch basins
Civil and industrial installations
Basement rooms prone to flooding
It can lift water laden with solid particles, ensuring reliability even in the most difficult cases
Pump body, seal holder cover, motor case, cap with handle made of AISI 304 stainless steel. Impeller made of microcast steel. Handle coated with insulating rubber. Motor shaft made of AISI 316 stainless steel. Double mechanical seal with interposed dolio chamber (non-toxic oil), made of carbon/alumina on motor side and silicon carbide/silicon carbide on pump side.
Dry motor, asynchronous type, sealed, cooled by the pumped liquid. Rotor mounted on ball bearings greased for life, oversized and selected for quiet operation and durability. Thermo-amperometric protection as standard. Permanently inserted condenser. Continuous duty with liquid at 35 °C and pump totally submerged. Number of poles: 2. Max starts/hour: 20. Construction according to standards CEI 2-3CEI 61-69 (EN 60335-2- 41).
| Parameter | Value |
|---|---|
| Operating range | Up to 24 m³/h with head up to 9.6 meters |
| Pumped liquid | Sewage and general used water, nonaggressive |
| Free passage | 50 mm |
| DNM GAS | 2" |
| Parameter | Value |
|---|---|
| Liquid temperature (domestic use) | 0°C to +35°C (EN 60335-2-41) |
| Liquid temperature (other uses) | 0°C to +50°C |
| Maximum immersion depth | 7 m |
| Ambient temperature (emerged motor) | up to +40°C |
| Parameter | Value |
|---|---|
| Power supply | Single-phase 220-240 V / 50 Hz |
| Rated power | 0.75 kW |
| Maximum power | 1.11 kW |
| Motor protection rating | IP68 |
| Motor insulation class | F |
| Power supply cable | 10 meters H07RN-F with Schuko plug |
| Component | Specifications |
|---|---|
| Impeller | Microcast steel vortex |
| Installation | Vertical, fixed or portable |
| Version | Non-automatic (without float) |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent