Griffon Silicone Sealant S-100, perfect for sealing in wet environments such as bathrooms, kitchens and showers. It provides permanent elasticity, mold resistance and durability even under environmental stresses, with the following characteristics:
Permanent elasticity with breaking strength up to 600%.
Mold-resistant and water-repellent
Resistant to UV rays and chemical cleaners
Perfect adhesion on tiles, glass, ceramics, glazed metals
Non-paintable
Does not discolor over time
Applicable with standard silicone gun
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Silicone S-100 is designed to permanently seal cracks and joints in high moisture areas, such as showers, sinks, bathroom fixtures, kitchens, and washing areas. Its mildew-resistant formulation, combined with its water and UV resistance, makes it ideal for both indoor and outdoor use.
Bathrooms, showers, kitchens
Joints between tiles and bathroom fixtures
Sinks, kitchen countertops, shower stalls
Adhesion on: ceramic, enamel, glass, stainless steel, aluminum
Not suitable on: acrylic, PVC, marble, natural stone, PE, PP, PTFE, bitumen
Cleaning: make sure surfaces are clean, dry and degreased. Roughen smooth plastics
Joint protection: apply tape to the edges to achieve a perfect seal
Application: cut the nozzle and spread the silicone into the joint (620 mm wide). Sand with mild soap within 10 minutes
Drying: hardens with moisture do not touch for at least 2 hours
Cleaning: remove fresh residues with turpentine. Dry ones only mechanically
| Specification | Value |
|---|---|
| Chemical base | Silicone elastomer (acidic) |
| Elasticity at break | 600% |
| Elastic modulus (E) | 0.3 MPa |
| Polymerization | 2 mm / 24h |
| Shore hardness A | 15 |
| Temperature resistance | -40°C / +120°C |
| Resistance to mold, UV, water | Very good |
| Density | 0.97 g/cm³ |
| Viscosity | Pasty |
| Color | Transparent |
| Cartridge size | Standard (not specified) |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent