Bticino audio video system base kit Sfera 360005

Bticino Sfera 360005 basic system kit components

Sfera wide-angle audio video module 351500

Sfera audio video module for building 2-WIRE color video systems. Equipped with High Quality 5 MP wide-angle camera with digital filters and white LEDs for illuminating the shooting field. The video signal is transmitted to the video door phones via PAL coding on SCS BUS 2-WIRE technology.

Strengths of the Sfera 351500 Audio Video Module

• Speaker and microphone volume adjustments

• Handles up to a maximum of 98 button calls using additional double row button modules

• Horizontal viewing angle (119°), vertical viewing angle (92°)

• Allows activation of an electro-lock connected directly to terminals S+ and S- (18 V 4 A impulsive - 250 mA maintenance on 30 Ohm max) and connection of a local door opener button on terminals PL

• Prepared for additional power supply

• Equipped with front LEDs for signaling operating status: door opener, active communication, call forwarded, and system busy

• Built-in optical sensor for switching on night backlighting

• To be completed with the specific Sfera New and Sfera Robur finish faceplates

• Device must be configured physically or via PC and specific software - free download from www.homesystems-legrandgroup.com
  
  

BUS-SCS power supply for 2-wire audio and video systems 346050

• Power supply for 2-wire audio and video systems in 6 DIN modular housing

• Power supply 110 - 240 Va.c. @ 50 60 Hz

• Provides output of two safety extra-low voltage supplies (one on the 3 terminals BUS TK, BUS PI and SCS, one on terminal 1 - 2); to be used alternately and NOT simultaneously

• The video adapter is built into the device (item 346830 should therefore not be used), so the use of the A/V node (F441) or multi-channel matrix (F441M) can be avoided if a total of three leads are not exceeded from the BUS PI and BUS TK terminals (MAX 2 PI risers + 1 TK or 1 PI riser + MAX 2 TK)

• It can also be used as an additional power supply (output 1 - 2) for local power supply of indoor stations or prearranged outdoor stations (in this case, no other output can be used)

• The device is electronically protected against overload and short circuit

• It is a double-insulated SELV safety device

• The device does NOT need to be configured