Abb Circuit breaker SN201 32A 1P+N 6KA C 1 Module SN201C32

SN201 circuit breakers realize protection against overloads and short circuits in a single module.

 

Curve C can tolerate short-duration overcurrents up to five to ten times the rated current and is widely used in domestic installations.

 

A circuit breaker is a safety device that can automatically (i.e., without external intervention) interrupt the flow of electric current in an electrical circuit in the event of an overcurrent.

 

Characteristics:

• Reference standards: IEC/EN 60898-1
• Rated operating voltage: according to IEC 60898-1 230 V
• Rated insulation voltage (Ui): according to IEC/EN 60664-1 500 V
• Impulse withstand voltage (Uimp): 4 kV
• Dielectric proof voltage: 2 kV
• Rated primary impulse withstand voltage: 4 kV
• Rated short-circuit withstand rating: (230 V) 6 kA
• Rated extreme short-circuit capacity (Icu): (230 V) 10 kA
• Rated service short-circuit capacity (Ics): (230 V AC) 6 kA
• Rated frequency (f): 50/60 Hz
• Power loss: 6.7 W
• Contact position indication: Red ON / Green OFF
• Energy limitation class: 3
• Electrical resistance: 10000 cycle(s)
• Mechanical resistance: 20000 cycle(s)
• Number of protected poles: 1
• Number of poles: 1+N
• Overvoltage Category: III
• Position of neutral terminals: Right
• Tightening torque: 1.2 N-m
• Connection capacity: Flexible 1 10 mm² - Rigid 1 16 mm².