Elkron DC600 Battery-Powered Slim Magnetic Contact White 80MM1E00113

Overview:

• The DC600 mini magnetic contact controls the opening/closing of specific devices (e.g., a door or window). The contact is fixed on the door or window frame, while the actuating magnet is to be fixed on the door or window itself. When the door or window is opened, the magnet moves away from the contact, triggering the internal magnetic switch and triggering the transmission of an alarm signal to the control panel. The device also has the ability to send information regarding anomalies and low battery warning
• The contact consists of a cover and a base. The cover contains all the electronic components, while the base is used to install the device. An internal tamper switch provides protection against unauthorized attempts to open or remove the device.
  
   

Accessories included:

• 1 Magnet
• 2 Screws
• 2 Dowels
• 1 Double-sided adhesive tape for magnet
• 2 Magnet mounting screws
• 2 Spacers for magnet
  
   

Supervision:

• In normal operation, the contact transmits a supervision signal to the control panel at intervals of 30 to 50 minutes
• If the supervision test in the control panel has been activated and the central unit does not receive the signal from the contact within a set time, the central unit will generate a supervision alarm
  
   

Tamper switch:

• Protects against attempts to remove or open the enclosure. When the tamper is open, the contact sends an alarm signal to the control panel and the LED lights up
  
   

Battery:

• The contact is powered by a CR2 3 V lithium battery and can signal when the battery is low. When the battery is low, the device sends a signal to the control panel along with the normal transmission. The LED lights up when the contact is in low battery alarm. When the battery is fully discharged, the contact no longer signals alarms and the LED flashes every 4 seconds
  
   

Test Mode:

• The contact can be set in Test mode for 3 minutes by pressing the Test button on the front cover once. In Test mode, the LED lights up whenever the contact is activated. Whenever the Test button is pressed, the contact will send a signal to the control panel for a radio range test and re-activate the Test mode again for 3 minutes. Test mode will automatically end after 3 minutes and return to normal operation mode
  
   

Features:

• Power supply: 1 lithium battery 3V type CR2
• Battery life: 10 years (typical value, may vary with use)
• Two-way radio frequency: 868.6375 MHz
• Operating temperature: -10°C to +45°C
• Dimensions: 85 mm x 25 mm x 20 mm
• Weight: 100 grams
• Complies with EN 50131 Grade 2, Class