Shielded Flameproof Cable FROH2R 2x2x0,75 mmq 100 m

Characteristics:

• Conductors: Annealed red copper CEI EN 60228
• Insulation: PVC of R2 quality CEI EN 50363
• Shielding: Al/Pet tape
• Shielding: Annealed red copper braid
• Sheathing: TM2 quality PVC CEI EN 50363
• Sheath colour: Grey
• Low halogen emission: (< 22%) IEC 60754-1
• Oil resistant: CEI 20-34/0-1
• Electrical resistance: (0.22 mm² <= 91 ohm/km) (0.35 mm² <= 57 ohm/km)
• Rated voltage Uo/U: 450/750 V
• Maximum voltage: 825 V
• Test voltage: 2500 V
• Max. operating temperature: 70 degrees
• Short-circuit temperature: 160 degrees

Use:

• For fixed installation indoors in normal or humid environments and temporarily outdoors. They can be installed on catwalks, pipes, conduits and similar systems. Underground installation is not permitted
• For cross-sections of less than 1.5mmq they are suitable for the transmission of signals and commands for the interconnection of instrumentation and control systems with digital or analogue signal transmission
• For larger cross-sections they are suitable for the transport of energy and the transmission of signals and commands, intended for interconnection between parts of construction machines, equipment in general including machine tools, where a certain degree of protection against electromagnetic (copper braid) and electrostatic (aluminium/polyester tape) interference is required
• In rooms that do not present a high risk in the event of fire such as buildings intended for civil use, with a fire height of less than 24 m, waiting room, bar, restaurant, doctor's surgery