Fror Shielded Flameproof Cable FROHH2R 3X0.75mmq 1 Meter

Features:

• Conductor: red copper, flexible formation, class 5
• Insulation: PVC, TI2 quality
• Core wrapping: polyester tape
• Screen 1: aluminum/polyester tape
• Screen 2: red copper wire braid
• Sheathing: PVC, TM2 quality
• Color: gray
• Rated voltage NPI® FROHH2R-450/750 V: Uo/U 450/750 V NPI® FROHH2R-300/500 V: Uo/U 300/500 V
• Maximum operating temperature: 70°C
• Minimum operating temperature: -15°C (in the absence of mechanical stress)
• Maximum short circuit temperature: 160°C
• Shield transfer impedance: max 100 m /m (100 KHz to 30 MHz)
• Good resistance to mechanical stress and chemical agents
• Good flexibility and behavior at low temperatures
• Minimum laying temperature: 0°C
• Recommended minimum bending radius: 8 times the cable diameter
• Maximum recommended tensile stress: 50 N/mm2 of copper cross section
  
   

Use and type of laying: Energy cable suitable for fixed installation in places with fire hazards such as fairs, civil, commercial, public entertainment buildings; in industrial construction limited to laying in pipes and ducts. Cable with rated voltage 300/500 V is only suitable for signaling and control circuits. Suitable when a special degree of protection against electrostatic (aluminum/polyester tape) and electromagnetic (copper braid) interference is required. Can be installed indoors in normal or humid environments and temporarily outdoors. Not permitted for underground installation.