Hermann Semiatek Condens condensing boiler 24kW AS/1 (H-IT) Natural gas 0010026091

Overview:

The SemiaTek Condens boiler is available in 24kW and 28kW natural gas power ratings. The most important novelty concerns the renewed primary exchanger; the old one in Al-Si has been replaced by one in stainless steel, which through a simple adjustment of the gas valve allows operation also on propane.

 

Innovation also from the combustion point of view: complete premixing with new fan-push technology where the fan in the new position upstream of the burner, guarantees the right ratio between air and gas by applying a proportional value of pressure that guarantees the opening of the gas valve without waste.

 

The design was developed to offer the optimal solution in terms of price, performance and quality.

 

SemiaTek Condens also features a new ultra-compact hydraulic block design with new location of key components, while still maintaining a good level of efficiency, performance and adequate comfort in both heating and domestic hot water production.

 

SemiaTek Condens is approved for outdoor installation down to -5°C and for installation inside built-in units (item 0010030847) down to -5°C.

 

Advantages:

• The new design of SemiaTek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 digits in white with intermittent lighting, indication of the boiler status is defined by the intermittent lighting of the selected icon
• SemiaTek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market
• SemiaTek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with your smartphone
  
   

Ease of installation:

• SemiaTek Condens is very easy to install thanks to its small size-62.6cm high, 40cm wide and 27cm deep-and low weight. The vertical plumbing connections are also designed to make installation easier and faster. For these reasons it is the ideal solution in replacements of old systems.
  
   

Features:


 

Heating:

• Capacity at the firebox Qmin/max - 75/55°C kW 6.2 - 18.8
• Rated output Pmin/max - 75/55°C kW 6.0 - 18.3
• Rated output Pmin/max - 50/30°C kW 6.5 - 20.0
• Efficiency Pmax - 80/60°C - 50/30°C % 97.2 / 106.4
• Efficiency P30% - 40/30°C % -/-/108.1
• Flow temp min/max °C 30 - 75
• Boiler operating pressure min/max bar 0.3/3
• Heating expansion tank - Capacity/precharge l/bar 8/0.75
  
   

Sanitary:

• DHW production type Instantaneous
• DHW quality classification (EN 13203-1) stars 2
• Capacity at the firebox min/max - 60°C kW 6.9 - 26.6
• Rated output min/max - 60°C kW 6.2 - 24
• Continuous flow rate (T= 25K) l/min 13.7
• Specific flow rate (T = 30K) (EN13203) l/min 11.5
• Peak flow rate in 10 minutes (?T = 30K) l/10 min 115
• DHW temperature min/max °C -35 - +55
  
   

General:

• Gas category II 2H 3P
• Weight 25.6 kg
• Heating return ¾ boiler - ¾ wall
• Domestic cold water inlet ¾ boiler - ½ wall
• Gas inlet ½ boiler - ½ wall
• Domestic hot water outlet ¾ boiler - ½ wall
• Heating flow ¾ boiler - ¾ wall