Ferrari MagBlack Magnetic Dirt Filter, designed to trap impurities and ferrous particles thanks to an 8,000 Gauss neodymium magnet and a stainless steel filter mesh. It provides effective cleaning of the heating circuit, protecting the boiler and improving system efficiency, with the following features:
Connection: Female/Female 3/4 inch
8,000 Gauss neodymium magnet to capture ferrous particles
800m stainless mesh filter to retain nonferrous impurities
Horizontal installation on boiler return line
Nylon composite material with fiberglass and nickel-plated brass fittings
Maximum flow rate 1,300 l/h, max pressure 6 bar, max temperature 80 degrees
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The Ferrari MagBlack dirt filter is an advanced solution for removing sediment and ferrous particles, protecting boilers, pumps and heat exchangers from the accumulation of impurities that can impair their operation.
The 8,000 Gauss neodymium magnet captures ferrous particles, preventing them from diffusing into the system.
The 800 ?m stainless steel filter mesh retains nonferrous impurities, promoting settling.
The defudger is designed for quick maintenance without disassembly:
Close the inlet valve
Remove the magnet to release ferrous particles
Open the drain plug and reopen the valve until the impurities are removed. Dual flushing action in equi-current and counter-current ensures thorough cleaning
Must be installed on the boiler return line, before the circulation pump
Fiberglass-reinforced nylon construction for high mechanical and chemical resistance
Nickel-plated brass fittings for durability and reliability
| Feature | Value |
|---|---|
| Body Material | Nylon with glass fiber |
| Fitting material | Nickel-plated brass |
| Filter material | Stainless steel |
| Magnet | Neodymium 8,000 Gauss |
| Filtration degree | 800 μm |
| Maximum flow rate | 1,300 l/h |
| Maximum pressure | 6 bar |
| Maximum temperature | 80 degrees |
| Fluid type | Water + glycol (max 50%) |
| Installation | Horizontal |
| Dimensions (W x H) | 106 x 175.5 mm with fittings |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent