Polychloroprene Sheathed Cable 2X1 mmq H07RNF2X1

€0.70

Tax included

Bipolar flexible polychloroprene-sheathed cables, cross-section 2X1 sq. mm:

Indicated conductor diameter: 1.3mm
Average insulation thickness: 0.8mm
Average sheath thickness: 1.3mm
Max outer diameter: 10mm
Max. electrical resistance at 20°C: 19.5 ohm/km
Mobile laying in air at 30°C: 10A
Fixed and protected laying in air at 30°C: 18A
Voltage drop: V/A-Km 45.2

Good flexibility and resistance to abrasion, blows, crushing and tearing. Good resistance to weathering, grease and mineral oils. UV resistant. The cable is suitable for power supply in construction and other civil engineering works.

The selling price is per meter.

Available

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

Description:

Conductor: red copper, flexible formation, class 5
Insulation: rubber, EI4 quality
Sheath: polychloroprene or equivalent elastomer, water resistant (AD6)
Color: black
Construction, electrical, physical and mechanical requirements: EN 50525-2-21 Low Voltage Directive: 2014/35/EU RoHS Directive: 2011/65/EU
Standard: EN 50575:2014+A1:2016 Class: Eca Classification: EN 13501-6 Flame propagation: EN 60332-1-2 Notified Body: 0051 - IMQ

Functional characteristics:

Rated voltage Uo/U: 450/750 V a.c. for fixed and protected installation 0.6/1 kV a.c.
Maximum operating temperature: 60°C (*)
Minimum operating temperature: -40°C (in the absence of mechanical stress)
Maximum short-circuit temperature: 200°C

Laying conditions:

Minimum installation temperature: -25°C
Recommended minimum bending radius: 6 times the cable diameter for mobile laying, 4 times for fixed laying
Maximum recommended tensile stress: 15 N/mm2 of copper cross section for mobile laying, 50 N/mm2 for fixed laying

Use and type of laying:

Reference Guide EN 50565: For mobile laying: indoor, outdoor use and in industrial and agricultural workshops. For powering industrial and agricultural machinery and connections subject to medium mechanical stress such as heating plates, inspection lamps, power tools such as drills, circular saws and household power tools. For fixed installation, can be used in temporary buildings or construction site shacks. Suitable for connections of construction elements of lifting equipment and machinery. Suitable for use in dry, damp or wet environments (AD6). In case of protected installations such as in pipelines or similar closed systems, use at voltages up to 1000 V AC or up to 750 V DC to ground is permitted.