Intercable AM0108 Shockproof body and tip tester

Equipment in the package:

• Stylus tester
• Nylon case
  
  

Features:

• Complies with egg product standard CEI EN 61243-3 (Low voltage bipolar detectors)
• DC and AC voltmeter up to 690 V
• Automatic detection of V dc and V ac
• Indication of cyclic phase direction, also possible with insulated gloves
• Continuity Test
• Identifies phase conductor using only one test lead
• Allows to verify also the intervention of the differential switch (Idn=30 mA max)
• Allows the measurement of voltage even when batteries are discharged
• Measurement area illumination
• Degree of protection IP 64
• Interchangeable contact electrodes Ø 2 or Ø 4 mm
• Ideal for the construction site and the installer
• Indication: LED and acoustic signal
• Flow rate selection: automatic
• Maximum permissible voltage: 690 V d.c./a.c.
• Maximum peak current value: Is less than 200 mA - Is less than 3.5 mA within 5 s
• Duty cycle: 30 s. on (at maximum voltage), 240 s. off
• Operating temperature/humidity range: -10° to 55°C, RH 96% max in voltage measurement (no condensation)
• Power on: automatic for voltages higher than 10V d.c./a.c.
• Power supply: 2 batteries 1.5V (type LR03)
• Dustproof/waterproof construction: IP 64 (according to CEI EN 60529)
• Dimensions: 245 x 61 x 36 mm
• Weight: 230 grams
  
  

Certificates:

• CEI EN 61243-3
• CAT- III / 1000V
• CAT- IV / 600V