Siemens Simatic S7-1500 AI 4xU/I/RTD/TC ST Analog Input Module 6ES75317QD000AB0
€439.10
Tax included
Siemens Simatic S7-1500 AI 4xU/I/RTD/TC ST Analog Input Module:
16 bit resolution
Accuracy 0.3 %.
4 channels in groups of 4
2 channels for RTD measurement
Common mode voltage 10V
Diagnostics
Process interrupt
Delivery including front push-in connector
Power supply element
Screen bracket and screen clamp.
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Features:
AI 4 x U/I/RTD/TC ST product type designation.
Hardware version From FS01
Firmware version V1.0.0
FW upgrade possible Yes
Product function I&M data Yes; I&M0 ... I&M3
Engineering with: STEP 7 TIA Portal design/integrated from version V13 / V13.0.2 - STEP 7 design/integrated from version V5.5 SP3 / - PROFIBUS from version GSD / GSD revision V1.0 / V5.1 - PROFINET from version GSD / GSD revision V2.3 / -
Oversampling operating mode No - MSI Yes
CiR - Configuration in RUN: Reparameterization in RUN possible Yes - Calibration in RUN possible Yes
Supply voltage: Nominal value (DC) 24 V - Permissible range, lower limit (DC) 19.2 V - Permissible range, upper limit (DC) 28.8 V - Reverse polarity protection Yes
Current consumption, max. 140 mA; with DC 24 V power supply
Power withdrawal from the backplane bus 0.7 W
Power loss, typ. 2,3 W
Analog inputs: Number of analog inputs 4 - for current measurement 4 - for voltage measurement 4 - for resistance/temperature measurement 2 - for thermocouple measurement 4
Permissible input voltage for voltage input (destructive limit), max. 28.8 V
Permissible input current for current input (destructive limit), max. 40 mA
Technical unit for temperature measurement settable Si; °C / °F / K
Dimensions: Width 25 mm - Height 147 mm - Depth 129 mm
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent