Griffon Gel PVC adhesive, thixotropic and THF-free, ideal for bonding pipes, sleeves and fittings with or without clearance. It offers easy application thanks to the brush built into the cap and provides fast and secure setting, up to 16 bar pressure, with the following characteristics:
Thixotropic, non-sagging, perfect even for vertical applications
Fast setting for immediate bonding
Filler, excellent hold even with up to 0.6 mm backlash
THF-free, safer for the user
Integrated brush for precise application
Suitable for pressure and drainage systems
Can be used on diameters up to 250 mm
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Griffon 125 ml PVC Gel is a high-performance adhesive designed for bonding rigid PVC pipes, sleeves and fittings, either with precise fit or slight play. Perfect for pressurized systems and domestic or industrial drains, this adhesive is thixotropic: it stays put where it is applied, without leaking.
Ideal for bonding:
Rigid PVC pipes
Fittings and sleeves
Drainage and pressure systems
Compatible with:
Couplings up to 250 mm in diameter
Maximum tolerance on diameter: 0.6 mm
For couplings where the pipe is wider than the sleeve: max 0.2 mm
Cut pipes perpendicularly, bevel edges and remove burrs
Clean surfaces thoroughly with Griffon Cleaner and a lint-free cloth
Apply the product
Immediately join the parts without rotating them
Remove excess and do not stress the joint for at least 10 minutes
Close the package tightly after use
| Feature | Value |
|---|---|
| Chemical base | PVC solution in solvent |
| Color | Colorless |
| Density | approx. 0.89 g/cm³ |
| Viscosity | 1200 mPa-s (thixotropic) |
| Dry residue | approx. 21% |
| Flash point | K1 (<21°C) |
| Chemical resistance | High, except for very aggressive substances |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent