Fracarro 2-Input Pole Amplifier is ideal for optimizing the reception of TV signals in bands III+DAB and UHF, thanks to a high gain of 42 dB for each input and independent adjustment up to 15 dB. Designed with a built-in 5G filter, it ensures an interference-free signal and maximum reliability, with the following features:
Number of inputs: 2 III+DAB, UHF
Frequencies: III+DAB: 174-240 MHz, - UHF: 470-694 MHz
Filter: 5G integrated
Connectors: F female
Supply voltage: 12V
Power consumption: 125 mA
Degree of protection: IP43
Dimensions: 120x50x105 mm
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The amplifier is constructed with a die-cast ZAMA chassis with metal covers for total shielding against electromagnetic interference (LTE Free). The protective ABS bell is designed for outdoor use and includes:
IP43 rating provides dust and water splash resistance.
With independent gain adjustments, each input can be customized by up to 15 dB, ensuring optimal signal quality according to specific needs. The built-in 5G filter eliminates interference from LTE signals, maintaining stable and clean reception.
| Supply voltage | 12V |
|---|---|
| Power consumption | 125 mA |
| Impedance | 75 ohms |
| Connectors | F female |
| Filter | 5G |
| Number of inputs | 2 |
| Inputs | III+DAB, UHF |
| Frequency III, DAB | 174 - 240 MHz |
| Frequency UHF | 470 - 694 MHz |
| Gain III+DAB | 22 dB |
| UHF Gain | 42 dB |
| Gain adjustment III+DAB | 15 dB |
| UHF gain adjustment | 15 dB |
| Typical noise figure III+DAB | 3 dB |
| Typical UHF noise figure | 5 dB |
| Number of outputs | 1 |
| Output level III+DAB | 112 dBµV |
| UHF output level | 116 dBµV |
| Working temperature | -10 to +55 degrees |
| Degree of protection | IP43 |
| Product dimensions | 120x50x105 mm |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent