Professional FTE inductive splitter with 2 outputs, high shielding Class A, TV/SAT band and current pass-through from output to input. Ideal for TV and SAT distributions in civil and professional systems, with the following features:
Number of outputs: 2
Supported frequencies: 5-2400 MHz
TV pass-through loss: 4.5 dB
SAT pass-through loss: 6 dB
Isolation between TV/SAT outputs: 30 dB
Return loss: 24 dB
Connection type: F Connector
Dimensions: 57x50x27 mm (LxHxD)
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The FTE splitter with 2 outputs is designed for distributing terrestrial TV and SAT signals to multiple devices, maintaining signal integrity thanks to low pass-through loss, high isolation between outputs, and constant impedance (typically 75 ohms).
It is suitable for centralized, residential, or professional systems where high reliability, interference protection, and versatility of use are required.
Supports the entire frequency range from 5 to 2400 MHz, covering:
Terrestrial TV (47 – 862 MHz)
SAT signals (950 – 2150 MHz)
Return signals or other services (5 – 47 MHz)
With shielding > 100 dB, it falls into Class A, ideal for environments with a strong presence of electromagnetic disturbances (EMC).
One of the most important features is the OUT-IN current pass-through, which allows powering LNB, multiswitch, or active amplifiers via the coaxial cable without the need for separate lines. This greatly simplifies the realization of SAT systems.
Distribution of SAT and TV signals to 2 outlets
Centralized multiservice cabling
Residential installations, condominiums, hotels
Compatible with SCR/dCSS and SAT decoders
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent