Fronius PRIMO Inverter 4.0KW FULL WIFI 2MPPT IP65 4.210.066

The Fronius Primo in the power categories 3.0 to 8.2 kw brings the new SnapINverter generation to perfection.

This single-phase, transformerless inverter is perfect for domestic systems.

The innovative SuperFlex Design offers maximum flexibility in the system, while the SnapINverter makes installation and maintenance easier than ever. The communication package with all standards such as Wlan, energy management, many interfaces and much more makes the Fronius Primo the ideal inverter for home use.

Features:

INPUT DATA:

• Max. input current 12.0 A / 12.0 A
• Max. contribution to short circuit current 18.0 A / 18.0 A
• Min. input voltage 80 V
• Power supply start voltage 80 V
• Nominal input voltage 710 V
• Max. input voltage 1000 V
• MPP voltage range 210 - 800 V
• Number of MPP trackers 2
• Number of DC inputs 2+2
• Maximum generator output power 6.0 kW peak
  
  

OUTPUT DATA:

• Rated AC power 4,000 W
• Max. output power 4,000 VA
• Max. output current 17.4 A
• Mains connection 1 ~ NPE 220 V / 230 V (180 V - 270 V)
• Frequency (frequency range) 50 Hz / 60 Hz (45 - 65 Hz)
• Distortion factor < 5 % Power factor
• Power factor 0.85 - 1 ind. / cap.
  
  

GENERAL DATA:

• Dimensions (height x width x depth) 645 x 431 x 204 mm
• Weight 21.5 kg
• Protection IP65
• Protection class 1
• Overvoltage category (DC / AC) 2/3
• Night consumption < 1 W
• Inverter design Transformerless
• Cooling Regulated ventilation
• Mounting Indoor and outdoor
• Ambient temperature range -40 - +55 Degrees
• Permissible air humidity 0 - 100 %.
• Max. altitude 4,000 m
• Connection technology DC 4x DC+ and 4x DC- screw terminals 2.5 - 16 mmq
• Connection technology AC 3-pole AC screw terminals 2.5 - 16 mmq
  
  

SAFETY DEVICES:

• DC insulation measurement
• Behaviour in the event of an overload Operating point shifting, power limitation
• DC disconnect switch
• Reverse polarity protection
  
  

INTERFACES:

• WLAN / Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
• 6 inputs or 4 digital inputs/outputs Connection to ripple control receiver
• USB (Type A socket) Software update via USB stick
• 2 RJ45 sockets (RS422) Fronius Solar Net
• Energy management signal output (potential-free output relay)
• External input So-Meter interface / Input for overvoltage protection
• RS485 Modbus RTU SunSpec or Smart Meter connection