Inverter Fronius Symo 15.0KW 2MPPT Full WIFI IP65 4,210,052

With power classes ranging from 3.0 to 20.0 kW, Fronius Symo is the three-phase inverter suitable for installations of any size. Thanks to the SuperFlex Design, Fronius Symo is the optimal device for sloping roofs or with different orientations. The standard Internet connection via WLAN or Ethernet and the easy integration of third-party components make Fronius Symo one of the most communicative drives available on the market. In addition, the meter interface enables dynamic management of the energy supplied and a clear and concise display of consumption.

Characteristics:

ENTRY DATA:

• Number of MPP trackers 2
• Max. input current 33.0 / 27.0 A
• Short circuit current max. range of solar modules 49.5 / 40.5 A
• DC input voltage range 200 - 1000 V
• Power supply start voltage 200 V
• Rated input voltage 600 V
• Voltage range MPP 320 - 800 V
• Usable MPP voltage range 200 - 800 V
• Number of DC connections 3 3
• Max. power of the PV generator 22.5 kWpeak

OUTPUT DATA:

• Rated AC power 15kW
• Max output power 15 kVA
• AC output current 21.7 A
• Mains connection 3- NPE 400/230, 3- NPE 380/220 V
• DC voltage range 150 - 280 V
• Frequency 50 / 60 Hz
• Frequency range 45 - 65 Hz
• Distortion factor 1,5
• Power factor 0 - 1 ind./cap.

GENERAL DATA:

• Dimensions (height) 725 mm
• Dimensions (width) 510
• Dimensions (depth) 225 mm
• Weight 43.4 kg
• Protection class IP66
• Safety class I
• Overvoltage category (DC/AC) 2/3
• Inverter design Transformerless
• Cooling Regulated ventilation
• Indoor and outdoor installation
• Ambient temperature range -40 Degrees - 60 Degrees
• Permissible air humidity 0 - 100 %.
• Max. height above sea level 2.000 m / 3.400 m
• DC connection technology 6 DC screw terminals and 6 DC screw terminals - 2.5-16 mmq
• AC connection technology 5-pole AC screw terminals 2.5-16 mmq

PROTECTIVE EQUIPMENT:

• DC insulation measurement
• Behaviour in the event of overload Displacement of the operating point, power limitation
• DC Disconnect Switch

INTERFACES:

• WLAN/Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
• 6 digital inputs and 4 digital inputs/outputs Connecting cyclic control signals to the receiver
• USB (type A connector) Datalogging, inverter update via USB stick
• 2 RS422 (RJ45 connector) Fronius Solar Net
• Signal output Power management (potential-free relay output)
• Integrated Datalogger and Web Server
• External input Connection to the S0/Analysis counter overvoltage protection
• RS485 Modbus RTU SunSpec or meter connection