DAB EVOSTA3 80/180 1 inch 180mm electronic circulator 60185505

DAB EVOSTA3 80/180 1"1/2 inch 180mm electronic circulator 60185505

€266.16

Tax included

Energy-saving DAB EVOSTA3 80/180 1" electronic circulator for circulating water in all types of domestic heating and air conditioning systems.

Max. operating pressure (bar): 10
Centre distance (mm): 180
Pump connections: DN25 threaded (G 1" 1/2)
Maximum flow rate (m³/h): 4.2
Maximum head (m): 8

Available

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

EVOSTA 3 is the new range of DAB circulators capable of offering the robustness of the mechanical circulator combined with the advantages of the electronic one. The permanent magnet synchronous motor, frequency converter, efficiency index EEI ? 0.19 combined with the IPX5 protection rating and integrated breather cap make the EVOSTA 3 family one of the best-in-class products in terms of efficiency and reliability. The EVOSTA 3 range of circulators lends itself very well to the replacement of older three-speed circulators both because of its compact size and the completeness offered in terms of performance. In addition, it is a product that can simplify the installer's work, having a single sequential setting button, and direct access to the motor shaft for possible unlocking. The EVOSTA 3 version has a display showing instantaneous flow rate, instantaneous head, and instantaneous power absorption in watts. The EVOSTA 3 version also offers the new automatic degassing feature.

Features:

180mm centerline
Pump connections DN25 THREADED ( G 1 inch)
Power supply 50Hz 1x230V ~
Power max 55W
In 0.053 -0.47A
Liquid temperature range: -10°C to +110°C
Operating pressure: 10 bar (1000 kPa)
Degree of protection: IPX5
Insulation class: F
Installation: with horizontal motor lasse
Standard power supply: single-phase 1x230 V~ 50/60 Hz
Pumped liquid: Clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water (glycol max. 30%).

CONSTRUCTION FEATURES.

Cast iron pump body with cataphoresis treatment and wet rotor motor. Steel motor case, technopolymer impeller. Ceramic motor shaft mounted on ceramic bushings lubricated by the pumped liquid. Stainless steel rotor sleeve, stator sleeve and end flange. Graphite thrust ring. EPDM seal rings and brass air vent plug. Due to the internal motor protection, the pump requires no overload protection.

CONTROL PANEL.

The functionality of EVOSTA 3 circulators can be changed via the control panel located on the cover of the electronic control device. The pump has nine setting options that can be selected with the MODE button. Pump settings are indicated by six light segments on the display. The EVOSTA 3 circulator has a display capable of showing the following quantities: height of the selected curve - instantaneous power absorption in watts - instantaneous head in m - instantaneous flow rate in m3/h.