Fischer PM U universal end clamp is the ideal choice for the installation of aluminum-framed photovoltaic panels. Thanks to its preassembled structure and easy insertion, it provides secure and quick fastening on Solar profiles, either in the middle or end position, with the following features:
Compatible with panels from 30 to 50 mm thick
Can be used as end or center clamp
Recessed screw to eliminate shading
Quick installation with 45-degree rotation
Holding spring for easy installation
Made of aluminum
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The PM U is designed to simplify the mounting of photovoltaic panels, with a rotating system that allows direct installation on any point of the profile. The internal spring holds the clamp in place during tightening, making the whole operation easier, safer and faster.
The TCEI screw embedded in the clamp body prevents any shading on PV module cells, ensuring maximum system efficiency.
Fixing photovoltaic panels on Solar profiles
Suitable for civil and industrial installations
Compatible with aluminum framed modules (30-50 mm)
Insert the lower part of the clamp into the upper slot of the profile
Rotate 45 degrees, clockwise for end use, counterclockwise for middle use
Position the clamp correctly to secure the module
Tighten the screw with a hex wrench (SW 6 mm) applying a torque of 10 Nm
| Material | Aluminum EN AB 46100 |
| Compatible panel thickness | 30-50 mm |
| Installation | By rotation, on Solar profiles |
| Screw type | TCEI with cylindrical head and hexagonal recess |
| Tightening torque | 10 Nm |
| Required wrench | SW 6 mm |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent