Fischer single-component, acetic cross-linking silicone 09219

Technical Data

• Mould-resistant.
• Easy to process at low (+5°C) and high temperatures (+40°C).
• Temperature resistant from 40° to +100°C.
• Not paintable, compatible with paints.
• Fast curing.
• Sealing on glass, ceramics and enamel.
• Sealing between (aluminium) frames and glass.
• Sealing of joints between tiles and glazed surfaces.
• Joints between windows and glass walls

Joint walls must be clean, dry and free of dirt, dust, rust, oil or other contaminants. Non-porous surfaces must be cleaned with solvent. Apply adhesive tape to the edges of the joint. Open the cartridge and cut the nozzle at 45° and to a diameter equal to the width of the joint. Apply the sealant along the joint, dispensing evenly. Level with silicone squeegee and, if necessary, finish with a finger wet with soap and water. After application, remove the adhesive tape and clean the accessories used. Uncured silicone can be removed using a solvent, while hardened silicone can only be removed mechanically. Not suitable on surfaces that exude oils, solvents or plasticisers. Not suitable on natural stone such as marble, granite and quartzite. Do not use on porous surfaces such as concrete, fibre cement and mortar. Do not use in contact with organic elastomers such as EPDM, APTK and neoprene.