Abb circuit breaker S304P 4P 32A 25kA type C 4 modules S304PC32

€114.31

Tax included

Abb automatic miniature circuit breaker S304P series, with the following characteristics:

Tripping characteristic: C
Rated operating voltage: acc. to IEC 60898-1 415V AC - acc. to IEC 60947-2 415V AC
Rated insulation voltage (U i ):acc. to IEC/EN 60664-1 500V
Rated impulse withstand voltage (U imp):6kV
Dielectric proof voltage:50/60 Hz, 1 minute:2kV
Input voltage type:AC/DC
Rated current:32 amps
Rated frequency:50/60 Hz
Power loss:11.6W (at rated operating conditions per pole 2.9W)
Number of poles: 4
Number of protected poles:4
Number of modules:4

Available

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

S300P series circuit breakers provide protection in industrial installations against overloads and short circuits. This product is manufactured to IEC and UL international standards for markets where it is required.

Curve C can tolerate short-time overcurrents up to five to ten times the rated current and is widely used in domestic installations.

A circuit breaker is a safety device that can automatically (i.e., without external intervention) interrupt the flow of electric current in an electrical circuit in the event of an overcurrent.

Operating voltage:

Maximum (tolerance included) 457V AC
Maximum 457V AC
Minimum 12 V AC
Minimum 12 V DC

Connection capacity:

10 / 10 mm² rod
Flexible with ferrule 0.75 ... 25 mm²
Flexible 0.75 ... 25 mm²
Rigid 0.75 ... 35 mm² Stranded
0,75 ... 35 mm²

Other Specifications:

Rated short-circuit capacity:(AC) 20 kA
Rated maximum short-circuit breaking capacity (I cu ):(415 V AC) 25 kA - (440 V AC) 15 kA
Power connection: Arbitrary
Contact position indication: Red ON / Green OFF
Electrical resistance: 10000 AC cycle
Mechanical resistance: 20000 cycle
Overvoltage category: IV
Tightening torque: 2.8 Nm
Type of screw terminal: Fault-tolerant bi-directional cylinder lifting terminal
Actuator marking: I/O
Actuator material: Insulation group II, black, sealable
Housing material:Insulation group I, RAL 7035
DIN rail mounting:TH35-15 (mounting rail 35 x 15 mm) acc. to IEC 60715 - TH35-7.5 (mounting rail 35 x 7.5 mm) acc. to IEC 60715
Mounting position: Any
Recommended screwdriver: Pozidrive 2
Operating temperature: -40/+70°C
Storage temperature: -55/+70°C
Cable stripping length: 14 mm
Degree of protection: IP20 housing, with cover IP40
Pollution degree: 3
Environmental conditions: 28 cycles at 55°C / 90-96 % and 25°C / 95-100 %
Vibration resistance acc. to IEC 60068-2-6:5g, 20 cycles at 5...150...5 Hz with 0.8 In load
Shock resistance acc. to IEC 60068-2-27:25 g / 3 shocks / 18 ms
Torque: UL/CSA: 18 in.
Dimensions: width 70mm, height 88mm, net depth/length 69mm
Net weight: 0.496 kg approx.