TV Splitter FTE for terrestrial and satellite digital 3 outputs 6 dB 5-2400 MHz SF3

€5.19

Tax included

FTE TV Splitter 3 outputs, compact, shielded and ideal for terrestrial and satellite digital, with the following features:

Number of outputs: 3
Operating frequencies: 5 - 2400 MHz
TV/SAT output isolation: 19 dB
Current pass-through: OUT-IN
Return loss: 10 dB
Connection type: Clamp

Available

Politiche per la sicurezza

(modificale nel modulo Rassicurazioni cliente)

Politiche per le spedizioni

(modificale nel modulo Rassicurazioni cliente)

Politiche per i resi

(modificale nel modulo Rassicurazioni cliente)

TV and SAT signal splitter maximum versatility in reduced spaces

The FTE TV splitter with 3 outputs is the perfect solution for distributing terrestrial and satellite digital signals in residential environments and centralized systems. Designed to operate over a wide frequency band from 5 to 2400 MHz, it is compatible with all TV (47-862 MHz) and SAT (950-2150 MHz) signals, both analog and digital.

Thanks to its compact design and lightweight, it can be easily installed even in very tight spaces, such as behind antenna sockets, in junction boxes, or inside technical panels.

Efficient signal distribution over multiple sockets

With 3 available outputs and a typical attenuation of 10.5 dB in the SAT band and 7.5 dB in the TV band, the splitter allows efficient signal distribution among multiple outlets. This makes it ideal for signal distribution within apartments or offices, or as a riser splitter in buildings with multiple staircases or housing units.

The DC OUT-IN pass-through allows powering active devices such as preamplifiers or LNBs directly through the splitter, without the need for additional wiring.

High shielding and isolation for a clean signal

The construction quality of the FTE splitter ensures Class A electromagnetic shielding, with a value greater than 70 dB, which protects the system from external interference. Additionally, the 19 dB isolation between outputs ensures reduced crosstalk between lines, maintaining the integrity of the distributed signal.

The clamp-type connection facilitates simple and secure wiring, suitable for both quick installations and more complex professional solutions.

Ideal applications for the FTE 3-output splitter

Signal distribution in apartments and single-family homes
Multiservice systems (TV + SAT) with multiple sockets
Riser column splitting in buildings
Systems requiring power from a single point
Solutions where space is limited but maximum efficiency is required

Technical Features FTE TV Splitter

Number of outputs	3
Operating frequencies	5 ÷ 2400 MHz
TV pass-through loss (47–862 MHz)	7.5 dB
SAT pass-through loss (950–2150 MHz)	10.5 dB
TV output isolation	19 dB
SAT output isolation	19 dB
Current pass-through	OUT → IN
Electromagnetic shielding	> 70 dB (Class A)
Return loss	10 dB
Connection type	Clamp
Operating temperature	-10 ÷ +55 °C
Dimensions (L × W × H)	55 × 25 × 17 mm