Cembre DB125-7/1N 125A single-pole distributor: 7-way with direct clamping and IP20 protection for tidy and safe switchboards.
Rated current: 125 A
Number of poles: 1 (unipolar)
Number of total ways: 7
Input holes: 1x Ø10 mm
Output holes: 7x Ø6.8 mm
Input connection: 1x(10÷35 mm² R/F)
Output connection: 6x(2.5÷16 mm² R/F) - 1x(6÷16 mm² R/F)
Short duration current (Icw): 4.2 kA
Peak current (IPK): 30 kA
Clamping geometry: hexagon socket screw
Housing: polycarbonate with PA 6.6 elements
Degree of protection: IP20
Rated voltage: 1000 V
Dimensions: 77x29x46 mm (HxWxD)
Installation: 35mm DIN rail or panel mounting.
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The Cembre DB125-7/1N single-pole distributor is a compact, high-performance solution for distributing electrical power in control and distribution boards. Equipped with 7 output ways and a current rating of 125 A, it enables neat and efficient wiring in small spaces.
With direct-tightening terminals and captive screws already loosened, installation time is greatly reduced. Tapered holes facilitate the introduction of conductors, ensuring accuracy and safety. Electrolytically tinned brass terminals ensure high conductivity and protection against corrosion.
The polycarbonate housing and PA 6.6 components provide mechanical and thermal resistance, while the IP20 rating ensures adequate insulation inside the switchboard. Convenient 35 mm DIN rail mounting or screw-on panel mounting makes the device extremely versatile.
| Feature | Detail |
|---|---|
| Product code. | DB125-7/1N |
| Brand | Cembre |
| Type | Single-pole distributor |
| Rated current (In) | 125 A |
| Peak current (IPK) | 30 kA |
| Short duration current (Icw) | 4.2 kA |
| Rated voltage | 1000 V |
| Number of ways | 7 |
| Input hole | 1 × Ø10 mm |
| Output holes | 7 × Ø6.8 mm |
| Input connection | 1 × (10÷35 mm² R/F) |
| Output connection | 6 × (2.5÷16 mm² R/F) 1 × (6÷16 mm² R/F) |
| Materials | Tin-plated brass, polycarbonate housing + PA 6.6 |
| Clamping geometry | Hexagon socket screw |
| Installation | 35 mm DIN rail or screw fixing |
| Degree of protection | IP20 |
| Dimensions | 77 mm (h) × 29 mm (w) × 46 mm (d) |
| Applications | Electrical panels, automation, LV distribution |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent