Leo electronic flow switch for automatic control of electric pumps, with start/stop according to the opening of taps, protection against dry running and water hammer, with the following features:
Fixed starting pressure: 2.2 bar
Maximum pressure: 10 bar
Maximum current: 10 A
Voltage: 230V
Connection: 1 inch threaded
Degree of protection: IP65, ideal for installation in wet environments
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The Leo flow switch is designed to ensure automatic management of the startup and shutdown of an electric pump based on the opening of system use points (taps, valves, etc.). It is a practical and reliable device for hydraulic automation in domestic, agricultural or light industrial environments.
Equipped with advanced safety functions, it automatically stops the pump in case of water shortage, preventing damage to the system. It also reduces the damaging effects of water hammer, improving the life and efficiency of the water supply.
With its standard 1-inch connection and IP65 rating, it is easy to install and durable even in outdoor or wet environments. It requires no complex configurations and is perfect for electric pumps up to 10 A and 10 bar pressure.
| Starting pressure | 2.2 bar |
|---|---|
| Maximum pressure | 10 bar |
| Hydraulic connection | 1 inch threaded |
| Supply voltage | 230V ±10% |
| Maximum current | 10 A |
| Operating temperature range | 0 - 60 degrees |
| Degree of protection | IP65 |
| Standard | RoHS |
| Functions | Automatic start/stop of electric pump Dry run shutdown Water hammer protection |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent