The Bticino F429G is a DALI / DALI-2 gateway designed to connect the MyHome home automation system with professional lighting systems driven via DALI-2 protocol. Equipped with 1 independent output, it allows the control of up to 64 DALI ballasts or devices with full support for ON/OFF, dimming and RGB/RGBW color management features. It is ideal for installations with many DALI lightings.
1 independent DALI/DALI-2 output
Management of up to 64 ballasts or DALI-2 fixtures
Supported functions: ON/OFF, dimmer, RGB, RGBW (dynamic white)
Configuration via Home + Project app
Power supply 27 VDC
4-module DIN-rail installation
Designed for installations with numerous DALI lighting points
Compatible with MyHome F460, F461 and Class 300EOS servers
Upgrade supported by systems with MHS1 via backup & restore function
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
The F429G gateway is the ideal interface for connecting digital lighting devices (up to 64) to the MyHome home automation system. Advanced RGB/RGBW and dimmer features enable precise, scenic and efficient light management.
Thanks to the Home + Project app, the device is fully configurable from a PC or smartphone, even remotely. Groups can be associated, DALI devices can be addressed, ignitions, colors and scenarios can be programmed. The system is expandable and upgradeable even in existing installations thanks to the backup & restore function from old MHS1 servers
With the ability to manage up to 64 DALI-2 ballasts, the gateway is designed for complex lighting installations, such as offices, showrooms, public buildings, commercial or residential environments with numerous lightings.
| Parameter | Value |
|---|---|
| Operating temperature | 5 - 40 °C |
| Input | BUS SCS |
| Parameter | Value |
|---|---|
| Voltage | 18 - 27 Vdc |
| Power consumption | 6 mA |
| Parameter | Value |
|---|---|
| Voltage | 110 to 240 Vac |
| Operating frequency | 50/60 Hz |
| Power consumption | 70 mA max |
| Parameter | Value |
|---|---|
| Rated voltage | 16 Vdc |
| Nominal power | 4 W |
| Current max. | 250 mA |
| Guaranteed current | 150 mA |
| Maximum startup time | 25 ms |
| Number of DALI devices that can be controlled | 64 |
| Maximum cable length | 300 m |
| Cable cross-section | 1.5 mm² |
| Compatible DALI loads | All |
| DALI-2 compatible loads | DT0, DT6, DT8 (up to RGBW on single channel) |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent