Led strip dimmer, single-channel dimmer with phase-cut output for LED strips and 230V dimmable lamps. PUSH control, level and status memory, customizable adjustments, with the following features:
Input voltage: 110/240 Vac
Phase cut dimmer: EV or TE
Control: Via push button (PUSH 230V)
Max manageable power: 230W
Level memory: Always on
Status memory: Adjustable
Protections: OCP, OLP, OTP, OVP
Degree of protection: IP20
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The TE-EV 230V dimmer is an advanced electronic dimmer designed for dimming LED strips, LED modules, dimmable lamps, and resistive loads. It is fully compatible with 230V systems and is easily controlled via mains voltage PUSH button.
The device supports rising phase (TE) and falling phase (EV Evolution Edge) dimming, adapting to different types of electronic ballasts and lamps. In particular, it smoothly handles:
Dimmable LED strips and modules up to 230W
LED, halogen or incandescent lamps up to 115W
Dimmable power supplies with DC/CV output for LEDs up to 115W
Equipped with non-excludable light level memory and settable status memory, it allows intuitive use in any environment. Calibration is via external push-button, allowing you to define:
Minimum brightness level
Gradual on/off time (Fade ON/OFF)
Logarithmic or linear dimming curve
The dimmer includes open circuit protection (OCP), overload (OLP), overvoltage (OVP) and overheating (OTP), for safe and durable use. The standardized plastic housing with electrical class II and IP20 grade makes it suitable for protected indoor installations.
| Feature | Value |
|---|---|
| Input Voltage | 110-240 Vac |
| Frequency | 50/60 Hz |
| Command | Push button (PUSH 230 Vac) |
| Output | Phase cut-off (TE/EV) |
| Manageable power - dimmable LED strips | 230 W |
| Manageable power - Dimmable LED modules | 230 W |
| Manageable power - Dimmable LED lamps | 115 W |
| Manageable power - Incandescent/halogen 230V | 230 W |
| Power manageable - DC/CV dimmable ballasts | 115 W |
| Functions | Level memory (non-deactivatable) Status memory (settable) Fade and minimum brightness calibration Logarithmic/linear curve |
| Protections | OCP, OTP, OVP, OLP |
| Operating temperature | -20 ÷ +50 °C |
| Wire system | 4 / 5 / 6 |
| Container | Plastic |
| Electrical Class | II |
| Degree of protection | IP20 |
| Areas of use | Description |
|---|---|
| Main uses | LED strips, LED modules, lamps and 230V dimmable power supplies |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent