Griffon Universal Silicone Repair Tape, sealing, insulating, self-fusing, waterproof and resistant to extreme conditions. Silicone-based for instant repairs, electrical insulation and watertight sealing. Can also be used underwater, with the following features:
Self-melting and self-adhesive on itself, welds without glue
Instantly waterproof and airtight
Pressure resistance up to 12 bar
Insulates up to 15,000 volts per layer
Resistant to UV rays, weather, oils, solvents, acids, gasoline
Applicable even under water and on pressurized surfaces
Easy to remove, no adhesive residue
Dimensions 25mm x 3 meters
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Self-melting silicone repair tape is an indispensable tool for sealing leaks, insulating electrical connections, protecting surfaces, blocking tools and consolidating bindings. Because it adheres to itself, it does not require clean or dry substrates, and can be used on any surface, even damp or wet.
Sealing and repair of:
Leaks on pipes, pipelines, siphons, fittings
Hydraulic hoses and fittings
Insulation and protection of:
Electrical plugs and cables, including immersion
External electrical connections
Creative and functional use for:
Non-slip protection on handles and tools
Strong bindings between different materials
Anti-corrosion coating
Perfect for indoor, outdoor and underwater environments
Preparation: no need to clean the substrate, but avoid contamination between layers
Initial application: remove the protective film. Start with a fully overlapping layer, pulling the tape to 200300% of its length
Overlap: continue application with 50% overlap between layers
Final layer: finish with a full layer and press firmly
To electrically insulate: apply at least 2 full layers
To seal leaks: 2 tightly wrapped layers provide sealing up to 1 bar. Each additional tightly pulled layer increases the seal by 1 bar to 12 bar
For leaks, cover a width of 10 cm with the leak in the center
Store in a cool, dry and frost-free place
Recommended temperature: +5/+25 degrees Celsius
Storage: in sealed package for at least 24 months
| Feature | Value |
|---|---|
| Material | Silicone |
| Self-melting | Yes (adheres to itself) |
| Waterproof | Immediate |
| Electrical insulation | Up to 15,000 V per layer |
| Pressure resistance | Up to 12 bar |
| Operating temperature | From -54°C to +260°C |
| Elasticity | Up to 300%. |
| UV and chemical resistance | Excellent |
| Residues | None after removal |
| Applications | Dry, wet, underwater |
| Polymerization | None: mechanical adhesion |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent