The Fantini Cosmi M29I50 diaphragm solenoid valve is a professional solution designed to handle large volumes of water, air, inert gases, and noncorrosive fluids. The normally open (NA) configuration and servo-assisted diaphragm ensure excellent performance in industrial applications such as autoclaves, air compressors, car washes, and pressure washers:
50 mm passage bore diameter
G 2 inch female connection
KV (flow rate in m³/h of water with pressure difference between upstream and downstream of 1 bar (1 bar = 100kPa) 37.2 m³/h
Closing time dp of 1 bar 3.5 seconds
Maximum differential pressure 10 bar
Minimum operating pressure 0.1 bar
Test pressure (DIN2401) PN 16 bar
M29 valve bodies mount only the IM29 coil supplied separate from the valve body (IM29F - IM29M).
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
Female threaded connections from G 3/8 inches to G 2 inches
Valves can be installed in any position
Normally open 2-way design
Indirect servo-diaphragm-locked operation
Fluid under pressure upstream of the valve, passes freely under and over the diaphragm in the valve passage bore and pilot plug bore
When the coil is energized, the pilot plug closes and the pressurized fluid upstream of the valve enters above the diaphragm, which, pressed against the seat, blocks its passage
N.B. The minimum operating pressure between upstream and downstream must be 0.1 bar
Features:
OT58 UNI 5705 stamped brass valve body.
NBR (Buna N) - Viton seals
AISI 304 stainless steel sleeve
AISI 430F stainless steel cores
AISI 302 stainless steel spring
Copper displacement ring
Operating temperature range -10 to 90°C
Maximum ambient temperature 50°C.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent