The Fantini Cosmi M23 diaphragm solenoid valve is an ideal solution for handling large flows of water, air, inert gases and other non-corrosive fluids. Designed with durable materials such as copper alloys, it ensures reliability and durability, making it perfect for industrial applications and complex installations:
Passage bore diameter 20 mm
G 3/4 inch female connection
KV 8.4 m³/h
Closing time dp of 1 bar 1.5 seconds
Maximum differential pressure 20 bar
Minimum operating pressure 0.1 bar
Test pressure (DIN2401) PN 25 bar.
Control coils are supplied separate from the valve body (IM21D - IM21F - IM21H - IM21M - IM22 - IM22A).
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
The Fantini Cosmi M23 solenoid valve is used to control the flow of fluids (such as water, air, inert gases or other noncorrosive fluids) within a system. Its main function is to open or close the fluid passage in response to an electrical command, making it ideal for handling large flow rates automatically and precisely.
Female threaded connections from G 3/8 to G 2. Valves can be installed in any position.
2-way normally closed execution
Indirect servo-locked operation
Fluid under pressure upstream of the valve enters above the diaphragm, which, pressed against the seat, blocks its passage
When the coil is energized, the pilot poppet opens discharging the downstream pressure that raises the center plate of the diaphragm, thus opening the fluid passage port
Features:
OT58 UNI 5705 stamped brass valve body
NBR (Buna N) - Viton seals
AISI 304 stainless steel sleeve
AISI 430F stainless steel cores
AISI 302 stainless steel spring
Copper displacement ring
Operating temperature range -10 to 90°C.
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent