Abb Circuit breaker S304P 10A 4P 25KA C 4 Modules S304PC10

Trip indicator The magnetothermal trip indicator window allows the cause of the trip to be identified directly on the circuit breaker: short circuit, overload, xxx, etc., or manual operation.

 

S304P series circuit breakers provide protection in industrial plants against overloads and short circuits. This product is manufactured to IEC and UL international standards for markets where it is required.

 

Curve C can tolerate short-time overcurrents up to five to ten times the rated current and is widely used in domestic installations.

 

A circuit breaker is a safety device that can automatically (i.e., without external intervention) interrupt the flow of electric current in an electrical circuit in the event of an overcurrent.

 

Features:

• Certificates: Standards: CSA 22.2 No. 235 - IEC/EN 60898-1 standard - IEC/EN 60947-2 standard -UL 1077
• Rated operating voltage: according to IEC 60898-1 415 V AC - according to IEC 60898-1 415 V - according to IEC 60947-2 415 V AC
• Operating voltage: Maximum (incl. tolerance) 457 V AC - Maximum 457 V AC - Minimum 12 V AC - Minimum 12 V DC
• Rated insulation voltage (U i ): according to IEC/EN 60664-1 500 V
• Rated impulse withstand voltage (U imp ): 6 kV
• Dielectric proof voltage: 50/60 Hz, 1 minute: 2 kV
• Input voltage type: alternating current/direct current
• Rated current (I n ): 10 A
• Rated short-circuit capacity: (AC) 25 kA - (400 V) 25 kA
• Rated maximum short-circuit breaking capacity (I cu ): (415 V AC) 25 kA - (440 V AC) 15 kA - (400 V) 25 kA
• Rated frequency (f): 50/60 Hz frequency
• Power loss: 6 weeks at rated operating conditions per pole 1.5 W
• Power connection: Arbitrary
• Contact position indication: Red on / Green off
• Electrical resistance: 20000 AC cycle
• Mechanical resistance: 20000 cycle
• Number of protected poles: 4
• Number of poles: 4
• Overvoltage category: IV
• Tightening torque: 2.8 Nm
• Type of screw terminal: bi-directional fail-safe cylinder lifting terminal
• Actuator marking: Input/Output
• Actuator material: Insulation group II, black, sealable
• Housing material: Insulation group I, RAL 7035
• DIN rail mounting: TH35-15 (35 x 15 mm mounting rail) according to IEC 60715 - TH35-7.5 (35 x 7.5 mm mounting rail) according to IEC 60715
• Connection capacities: Distribution rod 10 / 10 mm² Flexible with ferrule 0.75 ... 25 mm² - Flexible 0.75 ... 25 mm² - Flexible 0.75 ... 25 mm² - Rigid 0.75 ... 35 mm² - Stranded 0.75 ... 35 mm²
• Installation dimensions: according to DIN 43880 1
• Wire stripping length: 14 millimeters
• Terminal type: screw terminals
• Ambient air temperature: Operating -40 ... +70 °C
• Storage -55 ... +70 °C
• Degree of protection: IP20
• Width in number of modular spacings: 4.0
• Net width of product: 70 millimeters
• Net height of the product: 88 millimeters
• Net product depth/length: 69 millimeters
• Net weight of product: 0.496 kg
• Net weight of the pole: 0.124 kg
• Recessed depth ( t 2 ): 69 millimeters.