Fischer High Temperature Silicone Sealant 310 ml 00009271

Advantages:

• CE-marked for sealing facades (interior and/or exterior side, also for cold climate) and glazing (also for cold climate)
• High temperature resistance up to +250°C (in the short term up to +350°C) makes the product ideal for use in joints subjected to high thermal stresses
• High adhesion on many substrates. For very porous substrates, perform a preliminary compatibility test
• Acetically cured silicone component provides excellent workability and cures to a hard, flexible rubber
• Good resistance to chemicals, aging and UV light
  
   

Support materials:

• Concrete
• Masonry
• Plastics (not on PE, PP, Teflon)
• Metals
• Glass and ceramics
• Glass surfaces
• Enameled surfaces
• Anodized aluminum
• Not suitable for: Natural stone, Wood, Bituminous substrates
  
   

Installation:

• Remove dirt, dust, oil and rust from surfaces.
• Grind or sand porous surfaces. Clean glass and metals with solvent
• Cut off the extrusion end, attach the nozzle to the cartridge cut the tip to fit the size of the joint and insert into a silicone dispenser
• Apply tape to the edges of the joint and then product along it. Level with spatula. Remove the tape from the edges of the joint
• Not suitable for applications requiring resistance to direct flame or contact with food substances