Fischer Neutral Silicone Sealant for Mirrors 310 ml 00522519

Advantages:

• Ideal for shear retaining the weight of mirrors
• Does not affect the reflective oxide of the mirror, non-corrosive
• Excellent adhesion on porous and non-porous substrates, even without primer
• Good chemical and UV resistance
• May change color under extreme irradiation conditions
• Not paintable
  
   

Support materials:

• Concrete
• Masonry
• Natural stone (preliminary test recommended)
• Wood
• Plastics (not on PE, PP, Teflon)
• Metals
• Glass
• Mirrors
• Glass surfaces
• Glazed surfaces
• Ceramics
• Not suitable for: Bituminous substrates
  
   

Assembly:

• Remove dirt, dust, oil and rust from surfaces.
• Grind or sand porous surfaces. Clean glass and metals with solvent
• Cut off the extrusion end with a box cutter, apply the nozzle to the cartridge by cutting off the tip to fit the size of the joint and insert into a silicone dispenser
• Adhesive: apply product in dots or strips and hold firmly. Promote air access. Use a backing over the next 48 hours. Seal after 1 week
• Sealant: apply tape to the edges of the joint and then product along it. Level with trowel. Remove the tape from the edges of the joint.