Rinnai Infinity indoor LPG water heater 28 liter REUVCM2837FFUDLP

Overview:

 

Infinity 28i is the water heater that provides 28 liters/minute of domestic hot water. This water heater is installed inside the room and must be connected to a flue for flue gas discharge to the outside.

• Energy efficiency class A. Infinity 28i is an instantaneous water heater. This means that it produces hot water only when the faucet is turned on. It does not waste energy and thanks to the absence of water stagnation, it avoids the risk of Legionella Pneumophila formation, a respiratory disease that is very risky to our health
• Each Rinnai indoor water heater is equipped with an on-board, front-mounted control panel, as shown in the photo. From the control you control and change the operation of the water heater at your discretion. An LC code the user notices any limescale deposits, which are harmful to the machine, and can have the technician intervene in time. Infinity has the special feature of controlling the water temperature to the degree. If it is installed far from the utilities and the pipes generate heat loss, the Technician can activate the additional function of perfecting the temperature at the tap: from +1°C to +3°C. Accessory remote controls can be connected to a water heater for maximum comfort.
  
   

Advantages:

• Can be combined with solar panels
• Can be combined with recirculation
• Can be combined with storage tank max lt 1000
• Max 3 additional remote controls
• Can be combined in cascade
• Standard antifreeze down to -20°C
• Eco-friendly
• Can be combined with storage tank max lt 1000
  
   

Features:

• Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 8 - 18
• Indoor noise level 67
• Indoor Installation / Villa - Apartment with multifunction shower, whirlpool / professional installations
• Appliance type Forced flow - Type C
• Min/Max methane heat flow rate (kW) 2.8/53
• Water flow rate ?t 25°C Min/Max (l/min) 1.5/28 (37 l/min with ?T= 20°C)
• Max operating temperature (°C) 85
• Min activation pressure (bar) 0.1
• Min/Max operating pressure rating (bar) 2.5 - 10
• Normal / stand-by / antifreeze power consumption (W) 97 / 2 / 120
• Dimensions: Width 357 mm - Depth 235 mm - Height 583 mm
• Weight 21 kg
• Distance between fixing brackets 634.2mm
• Distance between fixing screws 80mm
• Flue spacing 105.2mm
  
   

Fittings:

• Water inlet ¾
• Water outlet ¾
• Gas ¾