Fischer radiator shelf 8mm diameter steel 00523972

Advantages:

• TC and RC brackets install on the finished gypsum board wall, no large holes or counterplates
• HM metal anchors for double slab already included in package
• Shelves can also be used on single slab by replacing HMs with single slab size
• Minimal aesthetic impact
• Easy vertical adjustment allows the radiator to be placed perfectly level
• Special plasticized paint helps to dampen noise
• The shelf can also be installed with the hook reversed to lock radiators in special situations (schools, public places, etc.)
  
  
   

Assembly:

• Place the radiator at the correct height on the wall. Using the spirit level, mark the position of the 2 radiator brackets. Then mark the position of the 2 dowels of each support base
• Drill holes in the plasterboard
• In case of double slab use HM metal fasteners in the package otherwise replace them with HM of suitable length (see load table)
• Screw the convex-headed adjusting screw onto the hook bracket up to 15 mm from the edge. Insert the bracket into the support base. Two depth adjustments are possible
• Attach the white plastic covers to the top of the support bases.
• Acting on the thumb screw, level the radiator