Fischer Dowel with screw for M10 S/20 fasteners 15 mm diameter 00090251

The expansion anchor, is an anchor with an internal thread for non-through-hole installations in galvanized steel. During installation, the cone expands the anchor body against the hole wall. The dust cap protects the thread from dirt. This ensures its functionality. The expansion anchor is ideal for fastening fall protection devices, systems and machinery in non-cracked concrete.

 

Advantages:

• The optimized geometry minimizes the effort for installation and allows it to be used in extremely confined spaces. This allows easy installation for the user
• The three-sector expanding body causes uniform load distribution and thus reduced spacing and edge distances. This makes the TA M extremely flexible
• Internal metric threading allows the use of standard screws and threaded rods for an ideal fit to the application
• Red plastic cap protects the thread from drilling dust, thus ensuring proper function
• Galvanized steel anchor
• Can also be used on compacted natural stone
• Optimized geometry to reduce installation effort and allow it to be fastened on even the tightest spaces
• Coupled with a hex head screw
  
   

Mounting:

• TA M is suitable for non-pass-through installation
• When torque is applied, the cone is drawn back into the anchor body, which expands against the hole wall
• For proper installation, the TA M nonthrough-hole anchor must rest on the element to be fastened