Chint Earth Leakage add-on Block NB1L-40 40A 300MA Type AC 2P 1.5 Modules 198372

Earth Leakage add-on Blocks are mechanically designed to prevent mismating between the block and the circuit breaker: the rating of the block must always be equal to or greater than that of the circuit breaker. The plastic clamp on the side allows faster mounting of the block on the circuit breaker, and a push-button prevents possible tripping.


 

It is used to protect human health in the event of a ground fault (electrical leakage) or phase-to-ground electrocution, thus also providing protection against macro electrical shock, both direct and indirect, on exposed persons.


 

The AC-type Earth Leakage add-on Block, works only with alternating current. Almost all installations for civil use fall into this type.


 

Characteristics:

• Reference standard: IEC/EN 61009-1
• Number of Poles: 2P
• Rated current: 40 A
• Differential characteristic: AC
• Rated voltage: 230 Vac
• Rated frequency: 50/60 Hz
• Isolation voltage: 500 Vac
• Uimp Impulse Voltage: 6 kV
• Power Dissipation: 9 W
• Number of DIN modules (1 DIN = 18 mm): 1.5
• Degree of protection: IP20
• Dimensions: 88x63x78.5 mm (HxWxD)
• Matching Accessories: Can be combined with NB1-63 and NB1-63H 2P up to 40A