Tecnel 12-36VDC 240-720W Constant Voltage LED Strip Dimmer DALIP110TRI

Single-channel single color 1x20A 12 24 36Vdc (240-480-720W) with inputs for DALI, 0/1-10Vdc, Pushbutton and Phase Cut controls both Leading edge and Trailing edge. To increase the total control power, different schemes can be adopted which provide MASTER-SLAVE multiple control in different modes where for example the Dimmer in Slave function can synchronize up to 10 PWM signal AMPLIFIERS for a total power of 2880W 12Vdc and 5760W 24Vdc. Other MASTER- SLAVE control systems include the use of DALI Dimmer, 0/1-10Vdc Dimmer both passive and active, Phase Cut Dimmer in Master function and the Dimmer in Slave function where really important powers of single color LED STRIPs all synchronized in all situations up to tens of KW can be adjusted. MASTER-SLAVE controls in the various solutions can be done with knob, with buttons, with radio controls and also with SMART APP Bluetooth mesh. In particular, MASTER-SLAVE control with Phase Cut Dimmer can be done with SMART APP Bluetooth mesh but also SMART APP WiFi with Google Assistant and Alexa compatible voice control.

Features:

• Multifunction LED dimmer 4 controls: DALI, AC push, 0 / 1-10V and Phase Cut Leading edge and Trailing edge
• 1-channel 12-36VDC output, max. 20A
• Dip switches to select different Dimmer commands
• Can be combined with all DALI systems on the market
• Built-in DALI-2 interface, DALI DT6 device
• 1 DALI address assigned by the DALI master
• Possibility of phase-cut control in Leading edge and Trailing edge
• Compatible with universal phase cut dimmers Triac - Mosfet
• Ability to use pwm amplifiers to expand output power up to Strip LED powers of kW
• Complies with IEC 62386-101: 2014, IEC 62386-102: 2014, IEC 62386-207 Ed2
• Degree of protection: IP20
  
  

Before power supply, select the control input control type by DIP switch according to the control system used. Different control types cannot be wired and used at the same time. Only 1 of 4 command types can be selected and wired in turn.

Safety warnings:

• DO NOT select the command type with power applied to the device.
• DO NOT install with power applied to the device
• DO NOT expose the device to moisture